From: Masami Hiramatsu <mhiramat@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>,
Ingo Molnar <mingo@redhat.com>, "H . Peter Anvin" <hpa@zytor.com>,
linux-kernel@vger.kernel.org,
Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>,
Andrew Morton <akpm@linux-foundation.org>,
Steven Rostedt <rostedt@goodmis.org>,
linux-arch@vger.kernel.org,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
"Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>,
linuxppc-dev@lists.ozlabs.org
Subject: [RFC PATCH -tip v5 18/27] powerpc/kprobes: Don't call the ->break_handler() in arm kprobes code
Date: Tue, 5 Jun 2018 00:57:13 +0900 [thread overview]
Message-ID: <152812783350.10068.4690566636762511152.stgit@devbox> (raw)
In-Reply-To: <152812730943.10068.5166429445118734697.stgit@devbox>
Don't call the ->break_handler() from the arm kprobes code,
because it was only used by jprobes which got removed.
This also makes skip_singlestep() a static function since
only ftrace-kprobe.c is using this function.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
---
arch/powerpc/include/asm/kprobes.h | 10 ----------
arch/powerpc/kernel/kprobes-ftrace.c | 16 +++-------------
arch/powerpc/kernel/kprobes.c | 31 +++++++++++--------------------
3 files changed, 14 insertions(+), 43 deletions(-)
diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
index 674036db558b..785c464b6588 100644
--- a/arch/powerpc/include/asm/kprobes.h
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -102,16 +102,6 @@ extern int kprobe_exceptions_notify(struct notifier_block *self,
extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
extern int kprobe_handler(struct pt_regs *regs);
extern int kprobe_post_handler(struct pt_regs *regs);
-#ifdef CONFIG_KPROBES_ON_FTRACE
-extern int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb);
-#else
-static inline int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- return 0;
-}
-#endif
#else
static inline int kprobe_handler(struct pt_regs *regs) { return 0; }
static inline int kprobe_post_handler(struct pt_regs *regs) { return 0; }
diff --git a/arch/powerpc/kernel/kprobes-ftrace.c b/arch/powerpc/kernel/kprobes-ftrace.c
index 1b316331c2d9..3869b0e5d5c7 100644
--- a/arch/powerpc/kernel/kprobes-ftrace.c
+++ b/arch/powerpc/kernel/kprobes-ftrace.c
@@ -26,8 +26,8 @@
#include <linux/ftrace.h>
static nokprobe_inline
-int __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb, unsigned long orig_nip)
+int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb, unsigned long orig_nip)
{
/*
* Emulate singlestep (and also recover regs->nip)
@@ -44,16 +44,6 @@ int __skip_singlestep(struct kprobe *p, struct pt_regs *regs,
return 1;
}
-int skip_singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
-{
- if (kprobe_ftrace(p))
- return __skip_singlestep(p, regs, kcb, 0);
- else
- return 0;
-}
-NOKPROBE_SYMBOL(skip_singlestep);
-
/* Ftrace callback handler for kprobes */
void kprobe_ftrace_handler(unsigned long nip, unsigned long parent_nip,
struct ftrace_ops *ops, struct pt_regs *regs)
@@ -82,7 +72,7 @@ void kprobe_ftrace_handler(unsigned long nip, unsigned long parent_nip,
__this_cpu_write(current_kprobe, p);
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
if (!p->pre_handler || !p->pre_handler(p, regs))
- __skip_singlestep(p, regs, kcb, orig_nip);
+ skip_singlestep(p, regs, kcb, orig_nip);
else {
/*
* If pre_handler returns !0, it sets regs->nip and
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 600678fce0a8..f06747e2e70d 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -317,25 +317,17 @@ int kprobe_handler(struct pt_regs *regs)
}
prepare_singlestep(p, regs);
return 1;
- } else {
- if (*addr != BREAKPOINT_INSTRUCTION) {
- /* If trap variant, then it belongs not to us */
- kprobe_opcode_t cur_insn = *addr;
- if (is_trap(cur_insn))
- goto no_kprobe;
- /* The breakpoint instruction was removed by
- * another cpu right after we hit, no further
- * handling of this interrupt is appropriate
- */
- ret = 1;
+ } else if (*addr != BREAKPOINT_INSTRUCTION) {
+ /* If trap variant, then it belongs not to us */
+ kprobe_opcode_t cur_insn = *addr;
+
+ if (is_trap(cur_insn))
goto no_kprobe;
- }
- p = __this_cpu_read(current_kprobe);
- if (p->break_handler && p->break_handler(p, regs)) {
- if (!skip_singlestep(p, regs, kcb))
- goto ss_probe;
- ret = 1;
- }
+ /* The breakpoint instruction was removed by
+ * another cpu right after we hit, no further
+ * handling of this interrupt is appropriate
+ */
+ ret = 1;
}
goto no_kprobe;
}
@@ -350,7 +342,7 @@ int kprobe_handler(struct pt_regs *regs)
*/
kprobe_opcode_t cur_insn = *addr;
if (is_trap(cur_insn))
- goto no_kprobe;
+ goto no_kprobe;
/*
* The breakpoint instruction was removed right
* after we hit it. Another cpu has removed
@@ -370,7 +362,6 @@ int kprobe_handler(struct pt_regs *regs)
/* handler has already set things up, so skip ss setup */
return 1;
-ss_probe:
if (p->ainsn.boostable >= 0) {
ret = try_to_emulate(p, regs);
next prev parent reply other threads:[~2018-06-04 15:57 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <152812730943.10068.5166429445118734697.stgit@devbox>
2018-06-04 15:51 ` [RFC PATCH -tip v5 07/27] powerpc/kprobes: Remove jprobe powerpc implementation Masami Hiramatsu
2018-06-07 11:31 ` Naveen N. Rao
2018-06-07 14:23 ` Masami Hiramatsu
2018-06-04 15:57 ` Masami Hiramatsu [this message]
2018-06-07 11:37 ` [RFC PATCH -tip v5 18/27] powerpc/kprobes: Don't call the ->break_handler() in arm kprobes code Naveen N. Rao
2018-06-07 14:28 ` Masami Hiramatsu
2018-06-07 16:37 ` Naveen N. Rao
2018-06-08 0:42 ` Masami Hiramatsu
2018-06-04 16:00 ` [RFC PATCH -tip v5 24/27] bpf: error-inject: kprobes: Clear current_kprobe and enable preempt in kprobe Masami Hiramatsu
2018-06-07 11:42 ` Naveen N. Rao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=152812783350.10068.4690566636762511152.stgit@devbox \
--to=mhiramat@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=ananth@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=hpa@zytor.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mingo@kernel.org \
--cc=mingo@redhat.com \
--cc=mpe@ellerman.id.au \
--cc=naveen.n.rao@linux.vnet.ibm.com \
--cc=paulus@samba.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).