From: sgosavi1 <Sachin.Gosavi@emerson.com>
To: linuxppc-dev@ozlabs.org
Subject: Re: Kernel panic when loading the IDE controller driver
Date: Thu, 21 Feb 2019 01:18:34 -0700 (MST) [thread overview]
Message-ID: <1550737114935-0.post@n7.nabble.com> (raw)
In-Reply-To: <1550230073842-0.post@n7.nabble.com>
Hi All,
I finally got the FLASH controller driver working and it is now successfully
reporting the presence of 2GB Flash in the board. I used the new "libata"
driver code present in the new kernel source under drivers/ata/. Also did
the required additions in the device tree to provide the IO port, IRQ and
PIO mode details to the driver.
However now I am getting the below errors.
[ 4.200145] scsi host0: pata_of_platform
[ 4.236999] ata1: PATA max PIO4 mmio cmd 0xe0000000 ctl 0xe200000c irq 63
[ 4.439985] ata1.01: ATA-7: 2GB ATA Flash Disk, C A254G4, max UDMA/133
[ 4.463419] ata1.01: 3571344 sectors, multi 0: LBA48
[ 4.483384] ata1.01: configured for PIO
[ 4.512936] scsi 0:0:1:0: Direct-Access ATA 2GB ATA Flash Di
54G4 PQ: 0 ANSI: 5
[ 4.555994] sd 0:0:1:0: [sda] 3571344 512-byte logical blocks: (1.83
GB/1.70 GiB)
[ 4.591975] sd 0:0:1:0: [sda] Write Protect is off
[ 4.611307] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 4.629733] sd 0:0:1:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.823702]
[ 4.823702] AT THE START OF CPU_STARTUP_ENTRY FUNCTION
[ 4.823734]
[ 4.823734] *****INSIDE IDLE LOOP********
[ 36.163139] ata1: drained 65536 bytes to clear DRQ
[ 36.185451] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 36.199598] ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 pio
4096 in
[ 36.199598] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 36.229002] ata1: soft resetting link
[ 36.559637] ata1.01: configured for PIO
[ 36.567563] ata1.01: device reported invalid CHS sector 0
[ 36.578396] ata1: EH complete
[ 68.919134] ata1: drained 65536 bytes to clear DRQ
[ 68.928530] ata1.01: limiting speed to UDMA7:PIO5
[ 68.937856] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 68.952487] ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 pio
4096 in
[ 68.952487] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 68.981876] ata1: soft resetting link
[ 69.311683] ata1.01: configured for PIO
[ 69.319304] ata1.01: device reported invalid CHS sector 0
[ 69.330274] ata1: EH complete
[ 101.687134] ata1: drained 65536 bytes to clear DRQ
[ 101.696646] ata1.01: limiting speed to PIO0
[ 101.704921] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 101.719288] ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 pio
4096 in
[ 101.719288] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 101.748593] ata1: soft resetting link
[ 102.079594] ata1.01: configured for PIO
[ 102.087204] ata1.01: device reported invalid CHS sector 0
[ 102.098144] ata1: EH complete
[ 132.407134] ata1: drained 65536 bytes to clear DRQ
[ 132.416687] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 132.430752] ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 pio
4096 in
[ 132.430752] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 132.460168] ata1: soft resetting link
[ 132.791594] ata1.01: configured for PIO
[ 132.799048] ata1.01: device reported invalid CHS sector 0
[ 132.810076] ata1: EH complete
[ 165.175163] ata1: drained 65536 bytes to clear DRQ
[ 165.186023] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[ 165.200192] ata1.01: cmd 20/00:08:00:00:00/00:00:00:00:00/f0 tag 0 pio
4096 in
[ 165.200192] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)
[ 165.229531] ata1: soft resetting link
Can anyone suggest why I am getting the above errors?
Thanks,
Sachin.
--
Sent from: http://linuxppc.10917.n7.nabble.com/linuxppc-dev-f3.html
next prev parent reply other threads:[~2019-02-21 8:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-13 11:01 Kernel panic when loading the IDE controller driver sgosavi1
2019-02-13 11:46 ` Christophe Leroy
2019-02-13 12:24 ` sgosavi1
2019-02-13 12:31 ` Christophe Leroy
2019-02-13 12:53 ` sgosavi1
2019-02-13 15:27 ` Christophe Leroy
2019-02-14 8:17 ` sgosavi1
2019-02-14 18:14 ` Michal Suchánek
2019-02-15 11:27 ` sgosavi1
2019-02-21 8:18 ` sgosavi1 [this message]
2019-02-14 17:54 ` Christophe Leroy
[not found] ` <CGME20190226115150eucas1p2f759d8df50102507a0ee66c4ab36003f@eucas1p2.samsung.com>
2019-02-26 11:51 ` Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1550737114935-0.post@n7.nabble.com \
--to=sachin.gosavi@emerson.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).