From: Ram Pai <linuxram@us.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: andmike@us.ibm.com, mst@redhat.com, aik@ozlabs.ru,
linuxram@us.ibm.com, mdroth@linux.vnet.ibm.com,
linux-kernel@vger.kernel.org, ram.n.pai@gmail.com, cai@lca.pw,
tglx@linutronix.de, sukadev@linux.vnet.ibm.com, hch@lst.de,
bauerman@linux.ibm.com, david@gibson.dropbear.id.au
Subject: [RFC v1 1/2] powerpc/pseries/iommu: Share the per-cpu TCE page with the hypervisor.
Date: Mon, 4 Nov 2019 13:28:42 -0800 [thread overview]
Message-ID: <1572902923-8096-2-git-send-email-linuxram@us.ibm.com> (raw)
In-Reply-To: <1572902923-8096-1-git-send-email-linuxram@us.ibm.com>
The hypervisor needs to access the contents of the page holding the TCE
entries while setting up the TCE entries in the IOMMU's TCE table. For
SecureVMs, since this page is encrypted, the hypervisor cannot access
valid entries. Share the page with the hypervisor. This ensures that the
hypervisor sees the valid entries.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
---
arch/powerpc/platforms/pseries/iommu.c | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 8d9c2b1..07f0847 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -37,6 +37,7 @@
#include <asm/mmzone.h>
#include <asm/plpar_wrappers.h>
#include <asm/svm.h>
+#include <asm/ultravisor.h>
#include "pseries.h"
@@ -179,6 +180,19 @@ static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
static DEFINE_PER_CPU(__be64 *, tce_page);
+/*
+ * Allocate a tce page. If secure VM, share the page with the hypervisor.
+ */
+static __be64 *alloc_tce_page(void)
+{
+ __be64 *tcep = (__be64 *)__get_free_page(GFP_ATOMIC);
+
+ if (tcep && is_secure_guest())
+ uv_share_page(PHYS_PFN(__pa(tcep)), 1);
+
+ return tcep;
+}
+
static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
long npages, unsigned long uaddr,
enum dma_data_direction direction,
@@ -206,8 +220,7 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
* from iommu_alloc{,_sg}()
*/
if (!tcep) {
- tcep = (__be64 *)__get_free_page(GFP_ATOMIC);
- /* If allocation fails, fall back to the loop implementation */
+ tcep = alloc_tce_page();
if (!tcep) {
local_irq_restore(flags);
return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
@@ -391,6 +404,7 @@ static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn,
return rc;
}
+
static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
unsigned long num_pfn, const void *arg)
{
@@ -405,7 +419,7 @@ static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn,
tcep = __this_cpu_read(tce_page);
if (!tcep) {
- tcep = (__be64 *)__get_free_page(GFP_ATOMIC);
+ tcep = alloc_tce_page();
if (!tcep) {
local_irq_enable();
return -ENOMEM;
--
1.8.3.1
next prev parent reply other threads:[~2019-11-04 21:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-04 21:28 [RFC v1 0/2] Enable IOMMU support for pseries Secure VMs Ram Pai
2019-11-04 21:28 ` Ram Pai [this message]
2019-11-04 21:28 ` [RFC v1 2/2] powerpc/pseries/iommu: Use dma_iommu_ops for Secure VMs aswell Ram Pai
2019-11-07 10:26 ` Michael Ellerman
2019-11-08 5:49 ` Ram Pai
2019-11-06 1:58 ` [RFC v1 1/2] powerpc/pseries/iommu: Share the per-cpu TCE page with the hypervisor Alexey Kardashevskiy
2019-11-06 17:01 ` Ram Pai
2019-11-07 5:58 ` Alexey Kardashevskiy
2019-11-07 10:29 ` Michael Ellerman
2019-11-08 6:05 ` Ram Pai
2019-11-06 1:59 ` [RFC v1 0/2] Enable IOMMU support for pseries Secure VMs Alexey Kardashevskiy
2019-11-06 16:46 ` Ram Pai
2019-11-06 18:06 ` Michael S. Tsirkin
2019-11-06 18:52 ` Michael Roth
2019-11-06 22:22 ` Ram Pai
2019-11-07 6:01 ` Alexey Kardashevskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1572902923-8096-2-git-send-email-linuxram@us.ibm.com \
--to=linuxram@us.ibm.com \
--cc=aik@ozlabs.ru \
--cc=andmike@us.ibm.com \
--cc=bauerman@linux.ibm.com \
--cc=cai@lca.pw \
--cc=david@gibson.dropbear.id.au \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mdroth@linux.vnet.ibm.com \
--cc=mst@redhat.com \
--cc=ram.n.pai@gmail.com \
--cc=sukadev@linux.vnet.ibm.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).