[PATCH 0/2] ASoC: fsl_spdif: Clear the validity bit for TX

[PATCH 0/2] ASoC: fsl_spdif: Clear the validity bit for TX

[Shengjiu Wang]

Clear the validity bit for TX
Add kctl for configuring TX validity bit

Shengjiu Wang (2):
  ASoC: fsl_spdif: Clear the validity bit for TX
  ASoC: fsl_spdif: Add kctl for configuring TX validity bit

 sound/soc/fsl/fsl_spdif.c | 51 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 47 insertions(+), 4 deletions(-)

-- 
2.21.0

[PATCH 1/2] ASoC: fsl_spdif: Clear the validity bit for TX

[Shengjiu Wang]

In IEC958 spec, "The validity bit is logical "0" if the
information in the main data field is reliable, and it
is logical "1" if it is not".

The default value of "ValCtrl" is zero, which means
"Outgoing Validity always set", then all the data is not
reliable, then some spdif sink device will drop the data.

So set "ValCtrl" to 1, that is to clear "Outgoing Validity"
in default.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_spdif.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 9fb95c6ee7ba..576370dc6e70 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -985,6 +985,10 @@ static int fsl_spdif_dai_probe(struct snd_soc_dai *dai)
 
 	snd_soc_add_dai_controls(dai, fsl_spdif_ctrls, ARRAY_SIZE(fsl_spdif_ctrls));
 
+	/*Clear the val bit for Tx*/
+	regmap_update_bits(spdif_private->regmap, REG_SPDIF_SCR,
+			   SCR_VAL_MASK, SCR_VAL_CLEAR);
+
 	return 0;
 }
 
-- 
2.21.0

[PATCH 2/2] ASoC: fsl_spdif: Add kctl for configuring TX validity bit

[Shengjiu Wang]

Add one kctl for configuring TX validity bit from user
space.

The type of this kctl is boolean:
on - Outgoing validity always set
off - Outgoing validity always clear

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_spdif.c | 47 +++++++++++++++++++++++++++++++++++----
 1 file changed, 43 insertions(+), 4 deletions(-)

diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 576370dc6e70..37053e8f29d0 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -776,8 +776,8 @@ static int fsl_spdif_vbit_info(struct snd_kcontrol *kcontrol,
 }
 
 /* Get valid good bit from interrupt status register */
-static int fsl_spdif_vbit_get(struct snd_kcontrol *kcontrol,
-				struct snd_ctl_elem_value *ucontrol)
+static int fsl_spdif_rx_vbit_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
 	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
@@ -791,6 +791,35 @@ static int fsl_spdif_vbit_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int fsl_spdif_tx_vbit_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
+	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct regmap *regmap = spdif_priv->regmap;
+	u32 val;
+
+	regmap_read(regmap, REG_SPDIF_SCR, &val);
+	val = (val & SCR_VAL_MASK) >> SCR_VAL_OFFSET;
+	val = 1 - val;
+	ucontrol->value.integer.value[0] = val;
+
+	return 0;
+}
+
+static int fsl_spdif_tx_vbit_put(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
+	struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
+	struct regmap *regmap = spdif_priv->regmap;
+	u32 val = (1 - ucontrol->value.integer.value[0]) << SCR_VAL_OFFSET;
+
+	regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_VAL_MASK, val);
+
+	return 0;
+}
+
 /* DPLL lock information */
 static int fsl_spdif_rxrate_info(struct snd_kcontrol *kcontrol,
 				struct snd_ctl_elem_info *uinfo)
@@ -948,11 +977,21 @@ static struct snd_kcontrol_new fsl_spdif_ctrls[] = {
 	/* Valid bit error controller */
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
-		.name = "IEC958 V-Bit Errors",
+		.name = "IEC958 RX V-Bit Errors",
 		.access = SNDRV_CTL_ELEM_ACCESS_READ |
 			SNDRV_CTL_ELEM_ACCESS_VOLATILE,
 		.info = fsl_spdif_vbit_info,
-		.get = fsl_spdif_vbit_get,
+		.get = fsl_spdif_rx_vbit_get,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_PCM,
+		.name = "IEC958 TX V-Bit",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ |
+			SNDRV_CTL_ELEM_ACCESS_WRITE |
+			SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = fsl_spdif_vbit_info,
+		.get = fsl_spdif_tx_vbit_get,
+		.put = fsl_spdif_tx_vbit_put,
 	},
 	/* DPLL lock info get controller */
 	{
-- 
2.21.0

Re: [PATCH 0/2] ASoC: fsl_spdif: Clear the validity bit for TX

[Mark Brown]

On Tue, 7 Jul 2020 16:54:24 +0800, Shengjiu Wang wrote:
> Clear the validity bit for TX
> Add kctl for configuring TX validity bit
> 
> Shengjiu Wang (2):
>   ASoC: fsl_spdif: Clear the validity bit for TX
>   ASoC: fsl_spdif: Add kctl for configuring TX validity bit
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/2] ASoC: fsl_spdif: Clear the validity bit for TX
      commit: 055b082156704b85a059770359d6cdedfb24831d
[2/2] ASoC: fsl_spdif: Add kctl for configuring TX validity bit
      commit: aa3fce5cd454db551a4ea1656bab9c2bacd2d1f4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark