From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id 1D579DDE24 for ; Mon, 17 Mar 2008 18:35:40 +1100 (EST) Received: from isper.nabble.com ([192.168.236.156]) by kuber.nabble.com with esmtp (Exim 4.63) (envelope-from ) id 1Jb9sd-0002iD-MV for linuxppc-embedded@ozlabs.org; Mon, 17 Mar 2008 00:35:35 -0700 Message-ID: <16089631.post@talk.nabble.com> Date: Mon, 17 Mar 2008 00:35:35 -0700 (PDT) From: Qin Lin To: linuxppc-embedded@ozlabs.org Subject: XUPV2P board opb_emac cannot work with linux-2.6-xlnx MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , HI all, Is anyone have the opb_emac (no DMA) work with the kernel linux-2.6-xlnx from git.xilinx.com. the message seams that it does work ,but the command ping return nothing! Could you kindly suggest me what to do? ps: the kernel booting message [ 0.258674] net_namespace: 64 bytes [ 0.269780] NET: Registered protocol family 16 [ 0.290415] Registering device xilinx_emac:0 [ 0.381687] NET: Registered protocol family 2 [ 0.392324] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.399556] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.403403] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.405409] TCP: Hash tables configured (established 8192 bind 8192) [ 0.405489] TCP reno registered [ 0.412758] sysctl table check failed: /kernel/l2cr .1.31 Missing strategy [ 0.413189] Call Trace: [ 0.413244] [cf41feb0] [c0008178] show_stack+0x48/0x184 (unreliable) [ 0.413467] [cf41fed0] [c00303c8] set_fail+0x50/0x68 [ 0.413640] [cf41fef0] [c0030b54] sysctl_check_table+0x64c/0x698 [ 0.413724] [cf41ff20] [c0030b68] sysctl_check_table+0x660/0x698 [ 0.413802] [cf41ff50] [c001e810] register_sysctl_table+0x64/0xb4 [ 0.414141] [cf41ff70] [c01e4b1c] register_ppc_htab_sysctl+0x18/0x2c [ 0.414311] [cf41ff80] [c01de1e4] kernel_init+0xc8/0x284 [ 0.414384] [cf41fff0] [c0004ab8] kernel_thread+0x44/0x60 [ 1.116395] xilinx_emac xilinx_emac.0: MAC address is now 2: 0: 0: 0: 0: 0 [ 1.123790] XEmac: using fifo mode. [ 1.128188] XEmac: Detected PHY at address 0, ManufID 0x0013, Rev. 0x78e2. [ 1.135715] eth0: Dropping NETIF_F_SG since no checksum feature. [ 1.151038] eth0: Xilinx 10/100 EMAC at 0x40C00000 mapped to 0xD0020000, irq=2 [ 1.158713] eth0: XEmac id 1.4a, block id 128, type 1 [ 1.194661] TCP cubic registered [ 1.198647] NET: Registered protocol family 1 [ 1.203728] NET: Registered protocol family 17 #ping 192.168.26.1 & # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 02:00:00:00:00:00 inet addr:192.168.26.127 Bcast:192.168.26.255 Mask:255.255.255.0 UP BROADCAST RUNNING MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:672 (672.0 B) Interrupt:2 Memory:40c00000-40c0ffff Regards Qin Lin -- View this message in context: http://www.nabble.com/XUPV2P-board-opb_emac-cannot-work-with-linux-2.6-xlnx-tp16089631p16089631.html Sent from the linuxppc-embedded mailing list archive at Nabble.com.