[PATCH] ASoC: fsl_spdif: use snd_ctl_boolean_mono_info

[PATCH] ASoC: fsl_spdif: use snd_ctl_boolean_mono_info

[Shengjiu Wang]

From: Viorel Suman <viorel.suman@nxp.com>

Remove redundant code and use snd_ctl_boolean_mono_info
instead.

Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_spdif.c | 30 +++---------------------------
 1 file changed, 3 insertions(+), 27 deletions(-)

diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 174e558224d8..1cd3441d1c03 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -801,18 +801,6 @@ static int fsl_spdif_qget(struct snd_kcontrol *kcontrol,
 	return ret;
 }
 
-/* Valid bit information */
-static int fsl_spdif_vbit_info(struct snd_kcontrol *kcontrol,
-				struct snd_ctl_elem_info *uinfo)
-{
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-	uinfo->count = 1;
-	uinfo->value.integer.min = 0;
-	uinfo->value.integer.max = 1;
-
-	return 0;
-}
-
 /* Get valid good bit from interrupt status register */
 static int fsl_spdif_rx_vbit_get(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_value *ucontrol)
@@ -925,18 +913,6 @@ static int fsl_spdif_rxrate_get(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
-/* User bit sync mode info */
-static int fsl_spdif_usync_info(struct snd_kcontrol *kcontrol,
-				struct snd_ctl_elem_info *uinfo)
-{
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-	uinfo->count = 1;
-	uinfo->value.integer.min = 0;
-	uinfo->value.integer.max = 1;
-
-	return 0;
-}
-
 /*
  * User bit sync mode:
  * 1 CD User channel subcode
@@ -1018,7 +994,7 @@ static struct snd_kcontrol_new fsl_spdif_ctrls[] = {
 		.name = "IEC958 RX V-Bit Errors",
 		.access = SNDRV_CTL_ELEM_ACCESS_READ |
 			SNDRV_CTL_ELEM_ACCESS_VOLATILE,
-		.info = fsl_spdif_vbit_info,
+		.info = snd_ctl_boolean_mono_info,
 		.get = fsl_spdif_rx_vbit_get,
 	},
 	{
@@ -1027,7 +1003,7 @@ static struct snd_kcontrol_new fsl_spdif_ctrls[] = {
 		.access = SNDRV_CTL_ELEM_ACCESS_READ |
 			SNDRV_CTL_ELEM_ACCESS_WRITE |
 			SNDRV_CTL_ELEM_ACCESS_VOLATILE,
-		.info = fsl_spdif_vbit_info,
+		.info = snd_ctl_boolean_mono_info,
 		.get = fsl_spdif_tx_vbit_get,
 		.put = fsl_spdif_tx_vbit_put,
 	},
@@ -1047,7 +1023,7 @@ static struct snd_kcontrol_new fsl_spdif_ctrls[] = {
 		.access = SNDRV_CTL_ELEM_ACCESS_READ |
 			SNDRV_CTL_ELEM_ACCESS_WRITE |
 			SNDRV_CTL_ELEM_ACCESS_VOLATILE,
-		.info = fsl_spdif_usync_info,
+		.info = snd_ctl_boolean_mono_info,
 		.get = fsl_spdif_usync_get,
 		.put = fsl_spdif_usync_put,
 	},
-- 
2.27.0

Re: [PATCH] ASoC: fsl_spdif: use snd_ctl_boolean_mono_info

[Mark Brown]

On Tue, 16 Mar 2021 17:42:16 +0800, Shengjiu Wang wrote:
> Remove redundant code and use snd_ctl_boolean_mono_info
> instead.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: fsl_spdif: use snd_ctl_boolean_mono_info
      commit: 6ad864ed6ac50f11a6d8575fda79991cca8f245c

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark