From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: timur@kernel.org, nicoleotsuka@gmail.com, Xiubo.Lee@gmail.com,
festevam@gmail.com, broonie@kernel.org, perex@perex.cz,
tiwai@suse.com, alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] ASoC: fsl_micfil: Don't use devm_regmap_init_mmio_clk
Date: Wed, 24 Mar 2021 17:58:48 +0800 [thread overview]
Message-ID: <1616579928-22428-7-git-send-email-shengjiu.wang@nxp.com> (raw)
In-Reply-To: <1616579928-22428-1-git-send-email-shengjiu.wang@nxp.com>
When there is power domain bind with ipg_clk clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
---
sound/soc/fsl/fsl_micfil.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index 2b9edd4bb94d..3cf789ed6cbe 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -31,6 +31,7 @@ struct fsl_micfil {
struct platform_device *pdev;
struct regmap *regmap;
const struct fsl_micfil_soc_data *soc;
+ struct clk *busclk;
struct clk *mclk;
struct snd_dmaengine_dai_dma_data dma_params_rx;
unsigned int dataline;
@@ -660,16 +661,22 @@ static int fsl_micfil_probe(struct platform_device *pdev)
return PTR_ERR(micfil->mclk);
}
+ micfil->busclk = devm_clk_get(&pdev->dev, "ipg_clk");
+ if (IS_ERR(micfil->busclk)) {
+ dev_err(&pdev->dev, "failed to get ipg clock: %ld\n",
+ PTR_ERR(micfil->busclk));
+ return PTR_ERR(micfil->busclk);
+ }
+
/* init regmap */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(regs))
return PTR_ERR(regs);
- micfil->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
- "ipg_clk",
- regs,
- &fsl_micfil_regmap_config);
+ micfil->regmap = devm_regmap_init_mmio(&pdev->dev,
+ regs,
+ &fsl_micfil_regmap_config);
if (IS_ERR(micfil->regmap)) {
dev_err(&pdev->dev, "failed to init MICFIL regmap: %ld\n",
PTR_ERR(micfil->regmap));
@@ -729,6 +736,7 @@ static int fsl_micfil_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, micfil);
pm_runtime_enable(&pdev->dev);
+ regcache_cache_only(micfil->regmap, true);
ret = devm_snd_soc_register_component(&pdev->dev, &fsl_micfil_component,
&fsl_micfil_dai, 1);
@@ -752,6 +760,7 @@ static int __maybe_unused fsl_micfil_runtime_suspend(struct device *dev)
regcache_cache_only(micfil->regmap, true);
clk_disable_unprepare(micfil->mclk);
+ clk_disable_unprepare(micfil->busclk);
return 0;
}
@@ -761,10 +770,16 @@ static int __maybe_unused fsl_micfil_runtime_resume(struct device *dev)
struct fsl_micfil *micfil = dev_get_drvdata(dev);
int ret;
- ret = clk_prepare_enable(micfil->mclk);
+ ret = clk_prepare_enable(micfil->busclk);
if (ret < 0)
return ret;
+ ret = clk_prepare_enable(micfil->mclk);
+ if (ret < 0) {
+ clk_disable_unprepare(micfil->busclk);
+ return ret;
+ }
+
regcache_cache_only(micfil->regmap, false);
regcache_mark_dirty(micfil->regmap);
regcache_sync(micfil->regmap);
--
2.27.0
next prev parent reply other threads:[~2021-03-24 10:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-24 9:58 [PATCH 0/6] ASoC: fsl: Don't use devm_regmap_init_mmio_clk Shengjiu Wang
2021-03-24 9:58 ` [PATCH 1/6] ASoC: fsl_esai: " Shengjiu Wang
2021-03-24 9:58 ` [PATCH 2/6] ASoC: fsl_spdif: " Shengjiu Wang
2021-03-24 9:58 ` [PATCH 3/6] ASoC: fsl_asrc: " Shengjiu Wang
2021-03-24 9:58 ` [PATCH 4/6] ASoC: fsl_easrc: " Shengjiu Wang
2021-03-24 9:58 ` [PATCH 5/6] ASoC: fsl_audmix: " Shengjiu Wang
2021-03-24 9:58 ` Shengjiu Wang [this message]
2021-03-24 23:39 ` [PATCH 0/6] ASoC: fsl: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1616579928-22428-7-git-send-email-shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=festevam@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=nicoleotsuka@gmail.com \
--cc=perex@perex.cz \
--cc=timur@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).