* video driver problems on set top box board
@ 2008-03-28 16:12 BAK
0 siblings, 0 replies; 2+ messages in thread
From: BAK @ 2008-03-28 16:12 UTC (permalink / raw)
To: linuxppc-embedded
I am working ST set top box board and I need help to resolve some problems.
if you 're working on set top box or you have experience with them these are
more detailed informations:
I am using a set top box board : STB442 based on STi7109 chip. I use STAPI
(drivers provided by ST) with STlinux kernell. I have some problems with a
module (named mme_host) which must be inserted with arguments (insmod
mme_host.ko transport0=<arguments_to_be_used>). This operation causes the
following error :
insmod: error inserting '/home/bakhaled/modules/mme/mme_host.ko': -1
Operation not permitted
I tried to insert the module without arguments (insmod mme_host.ko) and
this was successful. But when I try to run a test program for video ,
after inserting that mme module without arguments, the system crash down.
(don't execute console commands).
Has any one experienced this type of problems?
Have you any solutions ?
--
View this message in context: http://www.nabble.com/video-driver-problems-on-set-top-box-board-tp16352982p16352982.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 2+ messages in thread
* video driver problems on set top box board
@ 2008-03-28 17:01 BAK
0 siblings, 0 replies; 2+ messages in thread
From: BAK @ 2008-03-28 17:01 UTC (permalink / raw)
To: linuxppc-embedded
I am using a set top box board : MB442 based on STi7109 chip. I use STAPI
(drivers provided by ST) with STlinux kernell. I have some problems with a
module (named mme_host) which must be inserted with arguments (insmod
mme_host.ko transport0=<arguments_to_be_used>). This operation causes the
following error :
insmod: error inserting '/home/bakhaled/modules/mme/mme_host.ko': -1
Operation not permitted
I tried to insert the module without arguments (insmod mme_host.ko) and
this was successful. But when I try to run a test program for video ,
after inserting that mme module without arguments, the system crash down.
(don't execute console commands).
Has any one experienced this type of problems?
Have you any solutions ?
--
View this message in context: http://www.nabble.com/video-driver-problems-on-set-top-box-board-tp16354810p16354810.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-03-28 17:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-03-28 17:01 video driver problems on set top box board BAK
-- strict thread matches above, loose matches on Subject: below --
2008-03-28 16:12 BAK
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).