From mboxrd@z Thu Jan 1 00:00:00 1970 From: Neil Brown To: Atro.Tossavainen@helsinki.fi Date: Wed, 28 Jan 2004 12:42:18 +1100 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Message-ID: <16407.4986.950905.135422@notabene.cse.unsw.edu.au> Cc: linuxppc-dev@lists.linuxppc.org, linux-raid@vger.kernel.org, tas@mindspring.com Subject: Re: Root Drive Mirroring and LVM. In-Reply-To: message from Atro Tossavainen on Tuesday January 27 References: <868055F9-5045-11D8-8066-00039382032A@mindspring.com> <200401270801.i0R81HdT022197@kruuna.Helsinki.FI> Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: On Tuesday January 27, atossava@cc.helsinki.fi wrote: > Sorry about the crossposting. > > I wrote on the Yellow Dog Linux list when somebody asked about software > RAID on YDL about my experiences with it: > > >> The one really big gotcha is that the Macintosh partitioning scheme > >> can't tell the Linux kernel that certain partitions are to be > >> considered "Linux RAID autodetect" (as in x86 using the DOS partition > >> table type 0xfd). This means that you can't boot a Mac Linux system > >> directly from RAID because the kernel won't be able to autostart the > >> RAID devices. You have to work around this by creating an initial RAM > >> disk that uses the raidstart command to start your metadevices, then > >> swaps the initrd out of the way and proceeds to start the real system. > This is not entirely true. Certainly an initial-ram-disk is one solution and is (I think) the preferred long-term solution. However you can also boot from raid with kernel-parameters like: md=0,/dev/hda1,/dev/hdc1 boot=/dev/md0 where '0' indicated which md device (md0 in this case), and the remaining words are the devices to assemble it from. > to which Tim Seufert replied on the same list: > > > Hmmm. That would seem to be a lack in the Linux RAID code, since the > > Macintosh partition table has a vastly more flexible partition type > > field than DOS: instead of a single byte it's a string. It would mean > > breaking from the convention of using the "Apple_SVR2_UNIX" type for > > Linux partitions, but that really is just a convention as far as I know. > > Perhaps the PPC Linux developers and the Linux RAID developers should > get together on this and make some decisions so as to make it happen. > I personally think auto-detect is the wrong approach and have no desire to extend it to other partition types (I cannot remove it from DOS partitions as that breaks back-compatability). Just use "md=..." NeilBrown ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/