From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from gold.webfusion.co.uk (gold.webfusion.co.uk [212.67.202.159]) (using TLSv1 with cipher EDH-RSA-DES-CBC3-SHA (168/168 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTP id 08EAE67A6C for ; Mon, 14 Feb 2005 17:46:02 +1100 (EST) From: Yuli Barcohen MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Message-ID: <16912.18711.885679.679568@astp0002.localdomain> Date: Mon, 14 Feb 2005 08:45:43 +0200 To: Markus Westergren In-Reply-To: References: Cc: linuxppc-embedded@ozlabs.org Subject: Re: Support for Adder875 in Linux 2.4 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , >>>>> Markus Westergren writes: Markus> Hi, I'm working on a project which will use hardware based Markus> on Analogue & Micro Adder875 module together with Linux 2.4. Markus> I use RedBoot as bootloader and kernel 2.4.27-pre1, both Markus> came with the Adder module. Markus> The project require: Markus> - dual ethernet support with AM79C874 PHY Markus> The driver I've found (fec.c) only supports one Markus> ethernet. I'v started Markus> modifying a newer version of this driver which have Markus> support for my PHY. I have made some progress but it's Markus> not working yet. Found out that the first FEC is used to Markus> communicate with both PHY's. Both devices are detected Markus> correctly and the first seems to work but the second Markus> hangs the kernel when the first packet is sent or Markus> received. Markus> - SPI support Markus> Have found a simple driver (cpm_spi.c), which I have not Markus> tested yet. Markus> - PCMCIA support Markus> Will try to modify the m8xx_pcmcia driver. Markus> Not required but would be good to have: Markus> - USB host support Markus> Have no clue where to start looking. Markus> Have anyone used this module together with Linux and are Markus> there working drivers for it? Any tips/ideas? Arabella Linux supports all these. Not sure how you are going to use PCMCIA on this specific board - it's not connected. -- ======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli@arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================