From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from py-out-1112.google.com (py-out-1112.google.com [64.233.166.182]) by ozlabs.org (Postfix) with ESMTP id EC59CDDDED for ; Fri, 18 Jan 2008 13:49:16 +1100 (EST) Received: by py-out-1112.google.com with SMTP id z59so1192125pyg.27 for ; Thu, 17 Jan 2008 18:49:14 -0800 (PST) Message-ID: <169c03cb0801171849i59d35893hda44a7f0c5417b58@mail.gmail.com> Date: Thu, 17 Jan 2008 21:49:13 -0500 From: "Jean-Samuel Chenard" Sender: jsamch@gmail.com To: Jogi95@web.de Subject: Re: ml310 kernel2.6 booting problems MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , > Date: Thu, 17 Jan 2008 21:19:04 +0100 > From: Joachim Meyer > Hmmm... I'm not really ready to invest that much time into the PCI for ML= -310. > -------------------------------------------------------------------------= ------- > http://ozlabs.org/pipermail/linuxppc-embedded/2007-December/029211.html > > How much work would it be (approximated), and do you think I can success = (I'm a novice, like you know)? > Would you help me (Tell me where to start & what to do)? Hi Joachim, I was also interested in getting the PCI to run on the ML-310. I did spend an evening trying to integrate a patch sent over by Stephen Neuendorffer from Xilinx. I managed to get everything to compile (basically I fixed a few missing macros and had to search a bit to ensure that the memory mapping was correctly ported). Unfortunately, when I tried the new kernel, I think that I must have messed something up with the interrupt mappings (I am a newbie to PCI) and I had to remove some interrupt mapping from Stephen's patch. In any case, my ML-310 was booting the Linux kernel, but something was not right and I did not get anymore printouts from the UART Lite. Since I don't have the JTAG cable, I was stuck at this point with little means to debug the system. One day I'll spoil myself with one of those platform JTAG USB cables... I used Z-modem to transfer files to/from my workstation to my CF card on the ML-310 and this was an acceptable compromise. I'd still be interested in having the PCI bus working on the ML-310, but now that I got my BEE2 booting Linux 2.6, its not such a big priority for me. Let me know if you have some success in that direction. Regards, Jean-Samuel --=20 Integrated Microsystems Laboratory McGill University, Montr=E9al, QC, CANADA Web Page: http://chaos.ece.mcgill.ca