From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Message-ID: <17352.57423.119068.737164@cargo.ozlabs.ibm.com> Date: Sat, 14 Jan 2006 22:28:15 +1100 From: Paul Mackerras To: linuxppc-dev@ozlabs.org Subject: [PATCH] Remove powermac support from ARCH=ppc List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , This patch makes it possible to build kernels for PReP and/or CHRP with ARCH=ppc by removing the (non-building) powermac support. It's now also possible to select PReP and CHRP independently. Powermac users should now build with ARCH=powerpc instead of ARCH=ppc. This patch doesn't actually remove all the powermac files under arch/ppc, but they could go. This means, BTW, that it will no longer be possible to build 32-bit kernels for Apple G5 machines. Also, miboot users (are there any still?) are out of luck until I move the miboot stuff over to arch/powerpc/boot. Signed-off-by: Paul Mackerras --- diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index d658101..11899f0 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -58,11 +58,11 @@ config 6xx help There are four types of PowerPC chips supported. The more common types (601, 603, 604, 740, 750, 7400), the Motorola embedded - versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded - versions (403 and 405) and the high end 64 bit Power processors - (POWER 3, POWER4, and IBM 970 also known as G5) + versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM + embedded versions (403 and 405) and the POWER3 processor. + (For support for more recent 64-bit processors, set ARCH=powerpc.) Unless you are building a kernel for one of the embedded processor - systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx. + systems or a POWER3-based IBM RS/6000, choose 6xx. Note that the kernel runs in 32-bit mode even on 64-bit chips. Also note that because the 52xx, 82xx, & 83xx family has a 603e core, specific support for that chipset is asked later on. @@ -77,10 +77,6 @@ config POWER3 select PPC_FPU bool "POWER3" -config POWER4 - select PPC_FPU - bool "POWER4 and 970 (G5)" - config 8xx bool "8xx" @@ -123,7 +119,7 @@ config PHYS_64BIT config ALTIVEC bool "AltiVec Support" - depends on 6xx || POWER4 + depends on 6xx depends on !8260 && !83xx ---help--- This option enables kernel support for the Altivec extensions to the @@ -235,18 +231,9 @@ config KEXEC source "drivers/cpufreq/Kconfig" -config CPU_FREQ_PMAC - bool "Support for Apple PowerBooks" - depends on CPU_FREQ && ADB_PMU - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple PowerBooks, - this currently includes some models of iBook & Titanium - PowerBook. - config PPC601_SYNC_FIX bool "Workarounds for PPC601 bugs" - depends on 6xx && (PPC_PREP || PPC_PMAC) + depends on 6xx && PPC_PREP help Some versions of the PPC601 (the first PowerPC chip) have bugs which mean that extra synchronization instructions are required near @@ -258,26 +245,17 @@ config PPC601_SYNC_FIX If in doubt, say Y here. -config HOTPLUG_CPU - bool "Support for enabling/disabling CPUs" - depends on SMP && HOTPLUG && EXPERIMENTAL && PPC_PMAC - ---help--- - Say Y here to be able to disable and re-enable individual - CPUs at runtime on SMP machines. - - Say N if you are unsure. - source arch/ppc/platforms/4xx/Kconfig source arch/ppc/platforms/85xx/Kconfig config PPC64BRIDGE bool - depends on POWER3 || POWER4 + depends on POWER3 default y config PPC_STD_MMU bool - depends on 6xx || POWER3 || POWER4 + depends on 6xx || POWER3 default y config NOT_COHERENT_CACHE @@ -505,7 +483,7 @@ endchoice choice prompt "Machine Type" - depends on 6xx || POWER3 || POWER4 + depends on 6xx || POWER3 default PPC_MULTIPLATFORM ---help--- Linux currently supports several different kinds of PowerPC-based @@ -516,11 +494,15 @@ choice Platform) machines (including all of the recent IBM RS/6000 and pSeries machines), and several embedded PowerPC systems containing 4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the - default option is to build a kernel which works on the first three. + default option is to build a kernel which works on PReP and CHRP. - Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or - pSeries machine, a Power Macintosh (including iMacs, iBooks and - Powerbooks), or a PReP machine. + Note that support for Apple machines is now only available with + ARCH=powerpc, and has been removed from this menu. If you wish + to build a kernel for an Apple machine, exit this configuration + process and re-run it with ARCH=powerpc. + + Select CHRP/PReP if configuring for an IBM RS/6000 or + pSeries machine, or a PReP machine. Select Gemini if configuring for a Synergy Microsystems' Gemini series Single Board Computer. More information is available at: @@ -530,7 +512,7 @@ choice available at: . config PPC_MULTIPLATFORM - bool "CHRP/PowerMac/PReP" + bool "CHRP/PReP" config APUS bool "Amiga-APUS" @@ -768,25 +750,14 @@ config CPM2 on it (826x, 827x, 8560). config PPC_CHRP - bool + bool "Support for CHRP (Common Hardware Reference Platform) machines" depends on PPC_MULTIPLATFORM select PPC_I8259 select PPC_INDIRECT_PCI default y -config PPC_PMAC - bool - depends on PPC_MULTIPLATFORM - select PPC_INDIRECT_PCI - default y - -config PPC_PMAC64 - bool - depends on PPC_PMAC && POWER4 - default y - config PPC_PREP - bool + bool "Support for PReP (PowerPC Reference Platform) machines" depends on PPC_MULTIPLATFORM select PPC_I8259 select PPC_INDIRECT_PCI @@ -794,7 +765,7 @@ config PPC_PREP config PPC_OF bool - depends on PPC_PMAC || PPC_CHRP + depends on PPC_CHRP default y config PPC_GEN550 @@ -1166,7 +1137,7 @@ config ISA config GENERIC_ISA_DMA bool - depends on POWER3 || POWER4 || 6xx && !CPM2 + depends on POWER3 || 6xx && !CPM2 default y config PPC_I8259 diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile index 995f89b..efd8ce5 100644 --- a/arch/ppc/boot/Makefile +++ b/arch/ppc/boot/Makefile @@ -18,7 +18,7 @@ BOOT_TARGETS = zImage zImage.initrd znet bootdir-y := simple bootdir-$(CONFIG_PPC_OF) += openfirmware subdir-y := lib common images -subdir-$(CONFIG_PPC_OF) += of1275 +subdir-$(CONFIG_PPC_MULTIPLATFORM) += of1275 # for cleaning subdir- += simple openfirmware diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile index 83a6433..34e805f 100644 --- a/arch/ppc/boot/openfirmware/Makefile +++ b/arch/ppc/boot/openfirmware/Makefile @@ -21,26 +21,16 @@ bootlib := $(boot)/lib of1275 := $(boot)/of1275 images := $(boot)/images -OBJCOPY_ARGS := -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment -COFF_LD_ARGS := -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00500000 \ - -Bstatic CHRP_LD_ARGS := -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00800000 -NEWWORLD_LD_ARGS:= -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x01000000 COMMONOBJS := start.o misc.o common.o -COFFOBJS := coffcrt0.o $(COMMONOBJS) coffmain.o CHRPOBJS := crt0.o $(COMMONOBJS) chrpmain.o -NEWWORLDOBJS := crt0.o $(COMMONOBJS) newworldmain.o -targets := $(COFFOBJS) $(CHRPOBJS) $(NEWWORLDOBJS) dummy.o -COFFOBJS := $(addprefix $(obj)/, $(COFFOBJS)) +targets := $(CHRPOBJS) dummy.o CHRPOBJS := $(addprefix $(obj)/, $(CHRPOBJS)) -NEWWORLDOBJS := $(addprefix $(obj)/, $(NEWWORLDOBJS)) LIBS := lib/lib.a $(bootlib)/lib.a $(of1275)/lib.a $(common)/lib.a -HACKCOFF := $(utils)/hack-coff - ifdef CONFIG_SMP END := .smp endif @@ -72,56 +62,11 @@ targets += image.initrd.o $(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE $(call if_changed,genimage-initrd) -# Create the note section for New-World PowerMacs. -quiet_cmd_mknote = MKNOTE $@ - cmd_mknote = $(utils)/mknote > $@ -targets += note -$(obj)/note: $(utils)/mknote FORCE - $(call if_changed,mknote) - -$(obj)/coffcrt0.o: EXTRA_AFLAGS := -DXCOFF -targets += coffcrt0.o crt0.o -$(obj)/coffcrt0.o $(obj)/crt0.o: $(common)/crt0.S FORCE +targets += crt0.o +$(obj)/crt0.o: $(common)/crt0.S FORCE $(call if_changed_dep,as_o_S) -quiet_cmd_gencoffb = COFF $@ - cmd_gencoffb = $(LD) -o $@ $(COFF_LD_ARGS) $(COFFOBJS) $< $(LIBS) && \ - $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec) -targets += coffboot -$(obj)/coffboot: $(obj)/image.o $(COFFOBJS) $(LIBS) $(srctree)/$(boot)/ld.script FORCE - $(call if_changed,gencoffb) -targets += coffboot.initrd -$(obj)/coffboot.initrd: $(obj)/image.initrd.o $(COFFOBJS) $(LIBS) \ - $(srctree)/$(boot)/ld.script FORCE - $(call if_changed,gencoffb) - - -quiet_cmd_gen-coff = COFF $@ - cmd_gen-coff = $(OBJCOPY) $(OBJCOPY_ARGS) $< $@ && \ - $(HACKCOFF) $@ && \ - ln -sf $(notdir $@) $(images)/zImage$(initrd).pmac - -$(images)/vmlinux.coff: $(obj)/coffboot - $(call cmd,gen-coff) - -$(images)/vmlinux.initrd.coff: $(obj)/coffboot.initrd - $(call cmd,gen-coff) - -quiet_cmd_gen-elf-pmac = ELF $@ - cmd_gen-elf-pmac = $(LD) $(NEWWORLD_LD_ARGS) -o $@ \ - $(NEWWORLDOBJS) $(LIBS) $< && \ - $(OBJCOPY) $@ $@ --add-section=.note=$(obj)/note \ - -R .comment $(del-ramdisk-sec) - -$(images)/vmlinux.elf-pmac: $(obj)/image.o $(NEWWORLDOBJS) $(LIBS) \ - $(obj)/note $(srctree)/$(boot)/ld.script - $(call cmd,gen-elf-pmac) -$(images)/vmlinux.initrd.elf-pmac: $(obj)/image.initrd.o $(NEWWORLDOBJS) \ - $(LIBS) $(obj)/note \ - $(srctree)/$(boot)/ld.script - $(call cmd,gen-elf-pmac) - quiet_cmd_gen-chrp = CHRP $@ cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $(CHRPOBJS) $< $(LIBS) && \ $(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec) @@ -151,15 +96,11 @@ $(images)/miboot.initrd.image: $(images) # The targets used on the make command-line .PHONY: zImage zImage.initrd -zImage: $(images)/vmlinux.coff \ - $(images)/vmlinux.elf-pmac \ - $(images)/zImage.chrp \ +zImage: $(images)/zImage.chrp \ $(images)/zImage.chrp-rs6k \ $(images)/miboot.image @echo ' kernel: $@ is ready ($<)' -zImage.initrd: $(images)/vmlinux.initrd.coff \ - $(images)/vmlinux.initrd.elf-pmac \ - $(images)/zImage.initrd.chrp \ +zImage.initrd: $(images)/zImage.initrd.chrp \ $(images)/zImage.initrd.chrp-rs6k \ $(images)/miboot.initrd.image @echo ' kernel: $@ is ready ($<)' @@ -167,18 +108,10 @@ zImage.initrd: $(images)/vmlinux.initrd TFTPIMAGE := /tftpboot/zImage .PHONY: znetboot znetboot.initrd -znetboot: $(images)/vmlinux.coff \ - $(images)/vmlinux.elf-pmac \ - $(images)/zImage.chrp - cp $(images)/vmlinux.coff $(TFTPIMAGE).pmac$(END) - cp $(images)/vmlinux.elf-pmac $(TFTPIMAGE).pmac$(END).elf +znetboot: $(images)/zImage.chrp cp $(images)/zImage.chrp $(TFTPIMAGE).chrp$(END) @echo ' kernel: $@ is ready ($<)' -znetboot.initrd:$(images)/vmlinux.initrd.coff \ - $(images)/vmlinux.initrd.elf-pmac \ - $(images)/zImage.initrd.chrp - cp $(images)/vmlinux.initrd.coff $(TFTPIMAGE).pmac$(END) - cp $(images)/vmlinux.initrd.elf-pmac $(TFTPIMAGE).pmac$(END).elf +znetboot.initrd:$(images)/zImage.initrd.chrp cp $(images)/zImage.initrd.chrp $(TFTPIMAGE).chrp$(END) @echo ' kernel: $@ is ready ($<)' diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index ca02013..647da4c 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -9,7 +9,6 @@ extra-$(CONFIG_44x) := head_44x.o extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o extra-$(CONFIG_6xx) += idle_6xx.o -extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds obj-y := entry.o traps.o idle.o time.o misc.o \ @@ -17,7 +16,6 @@ obj-y := entry.o traps.o idle.o time. ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o -obj-$(CONFIG_POWER4) += cpu_setup_power4.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index e707c6f..c08ab43 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -1,5 +1,5 @@ /* - * Common prep/pmac/chrp boot and setup code. + * Common prep/chrp boot and setup code. */ #include @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -55,7 +54,6 @@ extern void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void bootx_init(unsigned long r4, unsigned long phys); extern void identify_cpu(unsigned long offset, unsigned long cpu); extern void do_cpu_ftr_fixups(unsigned long offset); extern void reloc_got2(unsigned long offset); @@ -80,8 +78,6 @@ EXPORT_SYMBOL(_machine); extern void prep_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void pmac_init(unsigned long r3, unsigned long r4, - unsigned long r5, unsigned long r6, unsigned long r7); extern void chrp_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); @@ -324,20 +320,15 @@ early_init(int r3, int r4, int r5) identify_cpu(offset, 0); do_cpu_ftr_fixups(offset); -#if defined(CONFIG_PPC_MULTIPLATFORM) +#if defined(CONFIG_PPC_OF) reloc_got2(offset); - /* If we came here from BootX, clear the screen, - * set up some pointers and return. */ - if ((r3 == 0x426f6f58) && (r5 == 0)) - bootx_init(r4, phys); - /* * don't do anything on prep * for now, don't use bootinfo because it breaks yaboot 0.5 * and assume that if we didn't find a magic number, we have OF */ - else if (*(unsigned long *)(0) != 0xdeadc0de) + if (*(unsigned long *)(0) != 0xdeadc0de) phys = prom_init(r3, r4, (prom_entry)r5); reloc_got2(-offset); @@ -424,6 +415,7 @@ platform_init(unsigned long r3, unsigned } #endif +#ifdef CONFIG_PPC_OF have_of = 1; /* prom_init has already been called from __start */ @@ -495,19 +487,17 @@ platform_init(unsigned long r3, unsigned #endif /* CONFIG_ADB */ switch (_machine) { -#ifdef CONFIG_PPC_PMAC - case _MACH_Pmac: - pmac_init(r3, r4, r5, r6, r7); - break; -#endif #ifdef CONFIG_PPC_CHRP case _MACH_chrp: chrp_init(r3, r4, r5, r6, r7); break; #endif } +#endif /* CONFIG_PPC_OF */ } +#endif /* CONFIG_PPC_MULTIPLATFORM */ +#ifdef CONFIG_PPC_OF #ifdef CONFIG_SERIAL_CORE_CONSOLE extern char *of_stdout_device; @@ -564,7 +554,7 @@ static int __init set_preferred_console( } console_initcall(set_preferred_console); #endif /* CONFIG_SERIAL_CORE_CONSOLE */ -#endif /* CONFIG_PPC_MULTIPLATFORM */ +#endif /* CONFIG_PPC_OF */ struct bi_record *find_bootinfo(void) { @@ -747,14 +737,6 @@ void __init setup_arch(char **cmdline_p) if (ppc_md.init_early) ppc_md.init_early(); -#ifdef CONFIG_PPC_MULTIPLATFORM - /* This could be called "early setup arch", it must be done - * now because xmon need it - */ - if (_machine == _MACH_Pmac) - pmac_feature_init(); /* New cool way */ -#endif - #ifdef CONFIG_XMON xmon_init(1); if (strstr(cmd_line, "xmon")) diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index 7c5cdab..51430e2 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -3,26 +3,18 @@ # # Extra CFLAGS so we don't have to do relative includes -CFLAGS_pmac_setup.o += -Iarch/$(ARCH)/mm +CFLAGS_chrp_setup.o += -Iarch/$(ARCH)/mm obj-$(CONFIG_APUS) += apus_setup.o ifeq ($(CONFIG_APUS),y) obj-$(CONFIG_PCI) += apus_pci.o endif -obj-$(CONFIG_PPC_PMAC) += pmac_pic.o pmac_setup.o pmac_time.o \ - pmac_feature.o pmac_pci.o pmac_sleep.o \ - pmac_low_i2c.o pmac_cache.o obj-$(CONFIG_PPC_CHRP) += chrp_setup.o chrp_time.o chrp_pci.o \ chrp_pegasos_eth.o ifeq ($(CONFIG_PPC_CHRP),y) obj-$(CONFIG_NVRAM) += chrp_nvram.o endif obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o -ifeq ($(CONFIG_PPC_PMAC),y) -obj-$(CONFIG_NVRAM) += pmac_nvram.o -obj-$(CONFIG_CPU_FREQ_PMAC) += pmac_cpufreq.o -endif -obj-$(CONFIG_PMAC_BACKLIGHT) += pmac_backlight.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o obj-$(CONFIG_PQ2ADS) += pq2ads.o obj-$(CONFIG_TQM8260) += tqm8260_setup.o @@ -47,6 +39,5 @@ obj-$(CONFIG_LITE5200) += lite5200.o obj-$(CONFIG_EV64360) += ev64360.o ifeq ($(CONFIG_SMP),y) -obj-$(CONFIG_PPC_PMAC) += pmac_smp.o obj-$(CONFIG_PPC_CHRP) += chrp_smp.o endif diff --git a/arch/ppc/platforms/chrp_pci.c b/arch/ppc/platforms/chrp_pci.c index bd047aa..c7fe618 100644 --- a/arch/ppc/platforms/chrp_pci.c +++ b/arch/ppc/platforms/chrp_pci.c @@ -275,7 +275,7 @@ chrp_find_bridges(void) setup_python(hose, dev); } else if (is_mot || strncmp(model, "Motorola, Grackle", 17) == 0) { - setup_grackle(hose); + setup_indirect_pci(hose, 0xfec00000, 0xfee00000); } else if (is_longtrail) { void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000); hose->ops = &gg2_pci_ops; diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c index 056ac2a..48996b7 100644 --- a/arch/ppc/platforms/chrp_setup.c +++ b/arch/ppc/platforms/chrp_setup.c @@ -53,6 +53,7 @@ #include #include #include +#include "mem_pieces.h" unsigned long chrp_get_rtc_time(void); int chrp_set_rtc_time(unsigned long nowtime); @@ -65,7 +66,6 @@ void rtas_display_progress(char *, unsig void rtas_indicator_progress(char *, unsigned short); void btext_progress(char *, unsigned short); -extern unsigned long pmac_find_end_of_memory(void); extern int of_show_percpuinfo(struct seq_file *, int); int _chrp_type; @@ -467,6 +467,75 @@ chrp_init2(void) ppc_md.progress(" Have fun! ", 0x7777); } +static struct device_node *memory_node; + +static int __init get_mem_prop(char *name, struct mem_pieces *mp) +{ + struct reg_property *rp; + int i, s; + unsigned int *ip; + int nac = prom_n_addr_cells(memory_node); + int nsc = prom_n_size_cells(memory_node); + + ip = (unsigned int *) get_property(memory_node, name, &s); + if (ip == NULL) { + printk(KERN_ERR "error: couldn't get %s property on /memory\n", + name); + return 0; + } + s /= (nsc + nac) * 4; + rp = mp->regions; + for (i = 0; i < s; ++i, ip += nac+nsc) { + if (nac >= 2 && ip[nac-2] != 0) + continue; + rp->address = ip[nac-1]; + if (nsc >= 2 && ip[nac+nsc-2] != 0) + rp->size = ~0U; + else + rp->size = ip[nac+nsc-1]; + ++rp; + } + mp->n_regions = rp - mp->regions; + + /* Make sure the pieces are sorted. */ + mem_pieces_sort(mp); + mem_pieces_coalesce(mp); + return 1; +} + +static unsigned long __init chrp_find_end_of_memory(void) +{ + unsigned long a, total; + struct mem_pieces phys_mem; + + /* + * Find out where physical memory is, and check that it + * starts at 0 and is contiguous. It seems that RAM is + * always physically contiguous on Power Macintoshes. + * + * Supporting discontiguous physical memory isn't hard, + * it just makes the virtual <-> physical mapping functions + * more complicated (or else you end up wasting space + * in mem_map). + */ + memory_node = find_devices("memory"); + if (memory_node == NULL || !get_mem_prop("reg", &phys_mem) + || phys_mem.n_regions == 0) + panic("No RAM??"); + a = phys_mem.regions[0].address; + if (a != 0) + panic("RAM doesn't start at physical address 0"); + total = phys_mem.regions[0].size; + + if (phys_mem.n_regions > 1) { + printk("RAM starting at 0x%x is not contiguous\n", + phys_mem.regions[1].address); + printk("Using RAM from 0 to 0x%lx\n", total-1); + } + + return total; +} + void __init chrp_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) @@ -525,7 +594,7 @@ chrp_init(unsigned long r3, unsigned lon ppc_md.get_rtc_time = chrp_get_rtc_time; ppc_md.calibrate_decr = chrp_calibrate_decr; - ppc_md.find_end_of_memory = pmac_find_end_of_memory; + ppc_md.find_end_of_memory = chrp_find_end_of_memory; if (rtas_data) { struct device_node *rtas; diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c index 29d074c..57753a5 100644 --- a/arch/ppc/platforms/chrp_time.c +++ b/arch/ppc/platforms/chrp_time.c @@ -163,13 +163,75 @@ unsigned long chrp_get_rtc_time(void) return mktime(year, mon, day, hour, min, sec); } +/* + * Calibrate the decrementer frequency with the VIA timer 1. + */ +#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ + +/* VIA registers */ +#define RS 0x200 /* skip between registers */ +#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ +#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ +#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ +#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ +#define ACR (11*RS) /* Auxiliary control register */ +#define IFR (13*RS) /* Interrupt flag register */ + +/* Bits in ACR */ +#define T1MODE 0xc0 /* Timer 1 mode */ +#define T1MODE_CONT 0x40 /* continuous interrupts */ + +/* Bits in IFR and IER */ +#define T1_INT 0x40 /* Timer 1 interrupt */ + +static int __init chrp_via_calibrate_decr(void) +{ + struct device_node *vias; + volatile unsigned char __iomem *via; + int count = VIA_TIMER_FREQ_6 / 100; + unsigned int dstart, dend; + + vias = find_devices("via-cuda"); + if (vias == 0) + vias = find_devices("via"); + if (vias == 0 || vias->n_addrs == 0) + return 0; + via = ioremap(vias->addrs[0].address, vias->addrs[0].size); + + /* set timer 1 for continuous interrupts */ + out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); + /* set the counter to a small value */ + out_8(&via[T1CH], 2); + /* set the latch to `count' */ + out_8(&via[T1LL], count); + out_8(&via[T1LH], count >> 8); + /* wait until it hits 0 */ + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dstart = get_dec(); + /* clear the interrupt & wait until it hits 0 again */ + in_8(&via[T1CL]); + while ((in_8(&via[IFR]) & T1_INT) == 0) + ; + dend = get_dec(); + + tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); + tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); + + printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", + tb_ticks_per_jiffy, dstart - dend); + + iounmap(via); + + return 1; +} void __init chrp_calibrate_decr(void) { struct device_node *cpu; unsigned int freq, *fp; - if (via_calibrate_decr()) + if (chrp_via_calibrate_decr()) return; /* diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 84ef030..159dcd9 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -39,8 +39,6 @@ obj-$(CONFIG_8xx) += m8xx_setup.o ppc8x ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o obj-$(CONFIG_PCI_QSPAN) += qspan_pci.o obj-$(CONFIG_PPC_OF) += prom_init.o prom.o -obj-$(CONFIG_PPC_PMAC) += open_pic.o -obj-$(CONFIG_POWER4) += open_pic2.o obj-$(CONFIG_PPC_CHRP) += open_pic.o obj-$(CONFIG_PPC_PREP) += open_pic.o todc_time.o obj-$(CONFIG_BAMBOO) += pci_auto.o todc_time.o diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 097d668..556895e 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -2734,7 +2734,7 @@ void radeonfb_pm_init(struct radeonfb_in * BIOS does tho. Right now, all this PM stuff is pmac-only for that * reason. --BenH */ -#if defined(CONFIG_PM) && defined(CONFIG_PPC_OF) +#if defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) if (_machine == _MACH_Pmac && rinfo->of_node) { if (rinfo->is_mobility && rinfo->pm_reg && rinfo->family <= CHIP_FAMILY_RV250) @@ -2778,12 +2778,12 @@ void radeonfb_pm_init(struct radeonfb_in OUTREG(TV_DAC_CNTL, INREG(TV_DAC_CNTL) | 0x07000000); #endif } -#endif /* defined(CONFIG_PM) && defined(CONFIG_PPC_OF) */ +#endif /* defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) */ } void radeonfb_pm_exit(struct radeonfb_info *rinfo) { -#if defined(CONFIG_PM) && defined(CONFIG_PPC_OF) +#if defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) if (rinfo->pm_mode != radeon_pm_none) pmac_set_early_video_resume(NULL, NULL); #endif diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h index eb317a0..6d431d6 100644 --- a/include/asm-ppc/prom.h +++ b/include/asm-ppc/prom.h @@ -167,6 +167,14 @@ extern int of_address_to_resource(struct extern int of_pci_address_to_resource(struct device_node *dev, int bar, struct resource *r); +#ifndef CONFIG_PPC_OF +/* + * Fallback definitions for builds where we don't have prom.c included. + */ +#define machine_is_compatible(x) 0 +#define of_find_compatible_node(f, t, c) NULL +#define get_property(p, n, l) NULL +#endif #endif /* _PPC_PROM_H */ #endif /* __KERNEL__ */