* XLlTemac port forwarding probelm?
@ 2008-06-02 21:37 khollan
0 siblings, 0 replies; only message in thread
From: khollan @ 2008-06-02 21:37 UTC (permalink / raw)
To: linuxppc-embedded
Hi everyone,
I'm using my custom Xilinx board as a gateway for a networked webcam. The
board is based on the ml410. Basically eth1 is connected to the outside
world and eth0 is connected to the webcam. I'm port forwarding port 80 with
iptables. I can connect to the webcams web server by going to the IP
address of the Xilinx board just fine, but here comes my problem...
After the first initial load, which is relatively fast, all subsequent
refreshes become ungodly slow. If I ifconfig down eth1 and bring it back up
the next refresh is fast again.
I'm using Xilinx's Local Link Mac with the Fifo interface instead of DMA.
Any ideas of whats going on?
Thanks
Kevin
--
View this message in context: http://www.nabble.com/XLlTemac-port-forwarding-probelm--tp17611404p17611404.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-06-02 21:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-02 21:37 XLlTemac port forwarding probelm? khollan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).