From: Paul Mackerras <paulus@samba.org>
To: Olaf Hering <olaf@aepfle.de>
Cc: linuxppc-dev@ozlabs.org, Linus Torvalds <torvalds@osdl.org>,
Nathan Lynch <ntl@pobox.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Linux v2.6.18-rc5
Date: Wed, 30 Aug 2006 16:13:16 +1000 [thread overview]
Message-ID: <17653.11388.637189.113422@cargo.ozlabs.ibm.com> (raw)
In-Reply-To: <20060829155216.GA25861@aepfle.de>
Olaf,
This patch should fix it. The problem was that I was comparing a
32-bit quantity with a 64-bit quantity, and consequently time wasn't
advancing. This makes us use a 64-bit quantity on all platforms,
which ends up simplifying the code since we can now get rid of the
tb_last_stamp variable (which actually fixes another bug that Ben H
and I noticed while going carefully through the code).
This works fine on my G4 tibook. Let me know how it goes on your
machines.
Paul.
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 18e59e4..a124499 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -125,15 +125,8 @@ static long timezone_offset;
unsigned long ppc_proc_freq;
unsigned long ppc_tb_freq;
-u64 tb_last_jiffy __cacheline_aligned_in_smp;
-unsigned long tb_last_stamp;
-
-/*
- * Note that on ppc32 this only stores the bottom 32 bits of
- * the timebase value, but that's enough to tell when a jiffy
- * has passed.
- */
-DEFINE_PER_CPU(unsigned long, last_jiffy);
+static u64 tb_last_jiffy __cacheline_aligned_in_smp;
+static DEFINE_PER_CPU(u64, last_jiffy);
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
/*
@@ -458,7 +451,7 @@ void do_gettimeofday(struct timeval *tv)
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
sec = xtime.tv_sec;
- nsec = xtime.tv_nsec + tb_ticks_since(tb_last_stamp);
+ nsec = xtime.tv_nsec + tb_ticks_since(tb_last_jiffy);
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
usec = nsec / 1000;
while (usec >= 1000000) {
@@ -700,7 +693,6 @@ #endif
tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy;
if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) {
tb_last_jiffy = tb_next_jiffy;
- tb_last_stamp = per_cpu(last_jiffy, cpu);
do_timer(regs);
timer_recalc_offset(tb_last_jiffy);
timer_check_rtc();
@@ -749,7 +741,7 @@ void __init smp_space_timers(unsigned in
int i;
unsigned long half = tb_ticks_per_jiffy / 2;
unsigned long offset = tb_ticks_per_jiffy / max_cpus;
- unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid);
+ u64 previous_tb = per_cpu(last_jiffy, boot_cpuid);
/* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */
previous_tb -= tb_ticks_per_jiffy;
@@ -830,7 +822,7 @@ #endif
* and therefore the (jiffies - wall_jiffies) computation
* has been removed.
*/
- tb_delta = tb_ticks_since(tb_last_stamp);
+ tb_delta = tb_ticks_since(tb_last_jiffy);
tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */
new_nsec -= SCALE_XSEC(tb_delta, 1000000000);
@@ -950,8 +942,7 @@ void __init time_init(void)
if (__USE_RTC()) {
/* 601 processor: dec counts down by 128 every 128ns */
ppc_tb_freq = 1000000000;
- tb_last_stamp = get_rtcl();
- tb_last_jiffy = tb_last_stamp;
+ tb_last_jiffy = get_rtcl();
} else {
/* Normal PowerPC with timebase register */
ppc_md.calibrate_decr();
@@ -959,7 +950,7 @@ void __init time_init(void)
ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n",
ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
- tb_last_stamp = tb_last_jiffy = get_tb();
+ tb_last_jiffy = get_tb();
}
tb_ticks_per_jiffy = ppc_tb_freq / HZ;
@@ -1036,7 +1027,7 @@ void __init time_init(void)
do_gtod.varp = &do_gtod.vars[0];
do_gtod.var_idx = 0;
do_gtod.varp->tb_orig_stamp = tb_last_jiffy;
- __get_cpu_var(last_jiffy) = tb_last_stamp;
+ __get_cpu_var(last_jiffy) = tb_last_jiffy;
do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
do_gtod.varp->tb_to_xs = tb_to_xs;
diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h
index dcde441..5785ac4 100644
--- a/include/asm-powerpc/time.h
+++ b/include/asm-powerpc/time.h
@@ -30,10 +30,6 @@ extern unsigned long tb_ticks_per_usec;
extern unsigned long tb_ticks_per_sec;
extern u64 tb_to_xs;
extern unsigned tb_to_us;
-extern unsigned long tb_last_stamp;
-extern u64 tb_last_jiffy;
-
-DECLARE_PER_CPU(unsigned long, last_jiffy);
struct rtc_time;
extern void to_tm(int tim, struct rtc_time * tm);
next prev parent reply other threads:[~2006-08-30 6:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.64.0608272122250.27779@g5.osdl.org>
[not found] ` <20060829115537.GA24256@aepfle.de>
2006-08-29 13:06 ` Linux v2.6.18-rc5 Nathan Lynch
2006-08-29 15:26 ` Yves-Alexis Perez
2006-08-29 15:52 ` Olaf Hering
2006-08-30 6:13 ` Paul Mackerras [this message]
2006-08-30 8:05 ` Olaf Hering
2006-08-30 9:00 ` Mikael Pettersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17653.11388.637189.113422@cargo.ozlabs.ibm.com \
--to=paulus@samba.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=ntl@pobox.com \
--cc=olaf@aepfle.de \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).