linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Paul Mackerras <paulus@samba.org>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] powermac: proper sleep management
Date: Tue, 1 May 2007 22:14:47 +1000	[thread overview]
Message-ID: <17975.12087.73762.795635@cargo.ozlabs.ibm.com> (raw)
In-Reply-To: <1177934887.5102.65.camel@johannes.berg>

Johannes Berg writes:

> I disagree with that, it'll get us no closer to keeping the generic code
> working for us. It does in fact work now, I've been using it for a long
> time and a few other people have also tried on older powerbooks. It's
> also very hard to convince anybody that we need changes in the generic
> code if at the same time we do our own stuff because "the generic code
> (you wrote) is not good enough for us anyway."

I think that once we have /sys/power/state working the distros will
start using it.  I want the old way to keep doing what it was doing
while the new way is tested and the bugs are shaken out.

Bottom line is I'm not going to apply a patch that makes pmu_ioctl
call pm_suspend.

Paul.

  reply	other threads:[~2007-05-01 12:14 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-27 11:25 patches for 2.6.22 Paul Mackerras
2007-04-27 12:00 ` Johannes Berg
2007-04-27 21:41 ` [PATCH] powerpc: fix suspend states again Johannes Berg
2007-04-27 21:53   ` Olof Johansson
2007-04-27 21:54     ` Johannes Berg
2007-04-27 21:57       ` Olof Johansson
2007-04-27 22:00       ` [PATCH] powerpc: put enable_kernel_spe into a header Johannes Berg
2007-04-27 22:02       ` [PATCH v2] powerpc: fix suspend states again Johannes Berg
2007-04-27 23:13         ` Olof Johansson
2007-04-30  0:14         ` Paul Mackerras
2007-04-30 11:35           ` Johannes Berg
2007-04-30 11:37           ` [PATCH v3] " Johannes Berg
2007-05-01 14:16             ` Johannes Berg
2007-04-27 23:42 ` patches for 2.6.22 Arnd Bergmann
2007-04-28  2:49 ` [PATCH] cell: cbe_cpufreq cleanup and crash fix Arnd Bergmann
2007-04-28  7:49 ` [PATCH] powermac: proper sleep management Johannes Berg
2007-04-28  8:08   ` Paul Mackerras
2007-04-28 12:52     ` Johannes Berg
2007-04-28  8:38   ` Benjamin Herrenschmidt
2007-04-28 12:51     ` Johannes Berg
2007-04-28 12:01   ` Paul Mackerras
2007-04-28 13:46     ` Johannes Berg
2007-04-30  5:31       ` Paul Mackerras
2007-04-30 12:08         ` Johannes Berg
2007-05-01 12:14           ` Paul Mackerras [this message]
2007-05-01 12:24             ` Johannes Berg
2007-04-30 11:44   ` [PATCH v3] " Johannes Berg
2007-05-01  8:55     ` Johannes Berg
2007-04-30 19:51 ` patches for 2.6.22 Kim Phillips
2007-05-01  3:38   ` Paul Mackerras
2007-05-02 14:12   ` Kumar Gala
2007-05-02 14:19     ` Kim Phillips
2007-05-01  9:06 ` Johannes Berg
2007-05-02  5:33 ` [PATCH] adb: replace sleep notifier with platform driver suspend/resume hooks Johannes Berg
2007-05-02  5:34 ` [PATCH] apm_emu: use generic apm-emulation Johannes Berg
2007-05-02  5:36 ` [PATCH] via-pmu: remove LED sleep notifier Johannes Berg
2007-05-02 10:57   ` Stephen Rothwell
2007-05-02 14:32     ` [PATCH v2] " Johannes Berg
2007-05-07  8:47       ` Paul Mackerras
2007-05-07  8:58         ` Johannes Berg
2007-05-07 15:08         ` [PATCH v3] " Johannes Berg
2007-05-02  5:39 ` [PATCH] remove awacs dmasound Johannes Berg
2007-05-02  6:18 ` [PATCH] via-pmu: kill sleep notifiers completely Johannes Berg
2007-05-02  6:21 ` [PATCH] powermac: support G5 CPU hotplug Johannes Berg
2007-05-02 10:55   ` Paul Mackerras
2007-05-02 14:33     ` Johannes Berg
2007-05-02 17:57       ` Segher Boessenkool
2007-05-02 22:03       ` Benjamin Herrenschmidt
2007-05-02 23:47         ` Segher Boessenkool
2007-05-02 23:59           ` Benjamin Herrenschmidt
2007-05-03  0:05             ` Segher Boessenkool
2007-05-03  0:18               ` Benjamin Herrenschmidt
2007-05-03  0:01         ` Paul Mackerras
2007-05-03  0:08           ` Benjamin Herrenschmidt
2007-05-03  0:10             ` Benjamin Herrenschmidt
2007-05-03  0:19             ` Segher Boessenkool
2007-05-03  0:17           ` Segher Boessenkool
2007-05-03  0:21             ` Benjamin Herrenschmidt
2007-05-03  0:24               ` Benjamin Herrenschmidt
2007-05-03  1:01               ` Segher Boessenkool
2007-05-03  2:11                 ` Benjamin Herrenschmidt
2007-05-03 16:49                   ` Segher Boessenkool
2007-05-02 20:33     ` [PATCH v2] " Johannes Berg
2007-05-02  6:33 ` [PATCH] powerpc: MPIC sys_device & suspend/resume Johannes Berg
2007-05-02  6:35 ` [PATCH] powermac: fix G5-cpufreq for cpu on/offline Johannes Berg
2007-05-03 12:25 ` patches for 2.6.22 Johannes Berg
2007-05-03 12:28   ` [PATCH] powerpc: dart iommu suspend Johannes Berg
2007-05-03 12:30     ` Benjamin Herrenschmidt
2007-05-03 12:34       ` Johannes Berg
2007-05-03 12:34         ` Benjamin Herrenschmidt
2007-05-03 12:48       ` Johannes Berg
2007-05-03 14:24         ` Olof Johansson
2007-05-04 10:51           ` Johannes Berg
2007-05-03 12:29   ` [PATCH] powerpc: mark pages that don't exist as nosave Johannes Berg
2007-05-03 12:31   ` [PATCH] powermac: suspend to disk on G5 Johannes Berg
2007-07-17 13:28 ` [PATCH] remove awacs dmasound Johannes Berg
2007-07-17 13:37   ` Adrian Bunk
2007-07-17 13:43     ` Johannes Berg
  -- strict thread matches above, loose matches on Subject: below --
2007-11-13 19:25 [PATCH] powermac: proper sleep management Johannes Berg
2007-12-04  5:48 ` Paul Mackerras

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=17975.12087.73762.795635@cargo.ozlabs.ibm.com \
    --to=paulus@samba.org \
    --cc=johannes@sipsolutions.net \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).