From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <187f01c10315$46329080$3000a8c0@primag> From: "Mark Powell" To: "ibm405gp" Cc: References: <3B409EE3.9CFCD22B@laposte.net> <3B409FE6.783C46A6@mvista.com> Subject: Re: ?Loading and debugging a linux kernel on a walnut board with a BDI2000 Date: Mon, 2 Jul 2001 17:37:24 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Ah yes, that's right - Scott reminded me. The vmlinuz-walnut file is in the image format for the IBM Treeboot mechanism. When I moved to PPCBoot for the boot ROM (http://ppcboot.sourceforge.net) I had make a PPCboot image from the plain kernel image, which is in arch/ppc/boot/images/vmlinux.gz You might tree using this file with the BDI2000. -- Mark Powell, Senior Software Engineer, Primagraphics Limited New Cambridge House, Litlington, nr.Royston, Herts, SG8 0SS, UK Tel. +44 1763 852222, Fax. 853324, http://www.primagraphics.co.uk ----- Original Message ----- From: "Scott Anderson" To: "ibm405gp" Cc: Sent: Monday, July 02, 2001 5:23 PM Subject: Re: ?Loading and debugging a linux kernel on a walnut board with a BDI2000 ibm405gp wrote: > My "vmlinuz-walnut" file generated with "make zImage" (with mvista > toolschain) seems invalid for > the bdi2000 but it works fine with 1.15 ROM Monitor It's been a while since I played with it, but as I recall the makefile tacks on a header to create an IBM Evaluation Board image. To figure out what it is doing, you might want to look in arch/ppc/boot/tree/Makefile for something called mkevimg. Scott Anderson scott_anderson@mvista.com MontaVista Software Inc. (408)328-9214 1237 East Arques Ave. http://www.mvista.com Sunnyvale, CA 94085 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/