From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tibor Pausz To: Subject: Adaptec 3940UW Date: Tue, 16 Jan 2001 20:59:55 +0100 Message-Id: <19341211133139.30056@mail.server.uni-frankfurt.de> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: If have a trouble with my new Adaptec 3940UW card. The card has two 7880 chips+Bridge chip After the init of the card linux freezes Linux 2.2.18 from kernel.org with UMAX S900 pci patch (see thread: Status of PCI-PCI bridge on UMAX S900) The boot output: device tree used 23368 bytes Total memory = 96MB; using 512kB for hash table (at c0200000) Linux version 2.2.18 (tibor@callisto) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #5 Tue Jan 16 18:09:37 EST 2001 PCI buses 0..2 controlled by bandit at f2000000 Cache coherency enabled for bandit/PSX at f2000000 pmac nvram is core99: 0 System has 32 possible interrupts GMT Delta read from XPRAM: 60 minutes, DST: off via_calibrate_decr: decrementer_count = 112499 (674999 ticks) Console: colour dummy device 80x25 Calibrating delay loop... 448.92 BogoMIPS Memory: 94748k available (1204k kernel code, 2236k data, 116k init) [c0000000,c6000000] Dentry hash table entries: 16384 (order 5, 128k) Buffer cache hash table entries: 131072 (order 7, 512k) Page cache hash table entries: 32768 (order 5, 128k) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 131072 bhash 65536) NET4: AppleTalk 0.18 for Linux NET4.0 Initializing RT netlink socket Starting kswapd v 1.5 MacOS display is /bandit/ATY,XCLAIM3DPro Using unsupported 1152x870 ATY,XCLAIM3DPro at 81801400, depth=32, pitch=4608 Console: switching to colour frame buffer device 144x54 fb0: Open Firmware frame buffer device on /bandit/ATY,XCLAIM3DPro ADB keyboard at 2, handler set to 3 ADB mouse at 3, handler 1 ADB mouse at 15, handler set to 4 (TurboMouse 5) PowerMac Z8530 serial driver version 2.0 tty00 at 0xf3013020 (irq = 15) is a Z8530 ESCC, port = modem tty01 at 0xf3013000 (irq = 16) is a Z8530 ESCC, port = printer pty: 256 Unix98 ptys configured Macintosh ADB mouse driver installed. Macintosh non-volatile memory driver v1.0 DMA sound driver installed, using 4 buffers of 32k. RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 fd0: SWIM3 floppy controller md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 raid1 personality registered (scsi0) found at PCI 1/4/0 (scsi0) Wide Channel A, SCSI ID=7, 16/255 SCBs (scsi0) Cables present (Int-50 NO, Int-68 NO, Ext-68 NO) (scsi0) Downloading sequencer code... 422 instructions downloaded (scsi1) found at PCI 1/5/0 (scsi1) Wide Channel B, SCSI ID=7, 16/255 SCBs (scsi1) Cables present (Int-50 NO, Int-68 NO, Ext-68 NO) (scsi1) Downloading sequencer code... 422 instructions downloaded ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/