From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <199901142259.QAA28915@lists.linuxppc.org> Date: Thu, 14 Jan 1999 17:59:27 -0500 (EST) From: "Jim Somerville" Reply-To: "Jim Somerville" Subject: MCP750 and CPX2000 System Scsi Woes To: linuxppc-dev@lists.linuxppc.org MIME-version: 1.0 Content-type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi All, We've tried booting 2.2 linux on two CPX2000 systems with the same result ie. scsi failures. The led on the cdrom flashes while it's being tested, if that helps anyone recognize the problem. Has anyone out there been successful booting the CPX2000? It is MCP750 based compact PCI. The console follows: PPC1-Bug>nbo Network Booting from: DEC21140, Controller 0, Device 0 Device Name: /pci@80000000/pci1011,9@e,0:0,0 Loading: ppc/linux/zImage.prep Client IP Address = 47.157.96.65 Server IP Address = 47.157.96.39 Gateway IP Address = 0.0.0.0 Subnet IP Address Mask = 255.255.240.0 Boot File Name = ppc/linux/zImage.prep Argument File Name = Network Boot File load in progress... To abort hit Bytes Received =&621843, Bytes Loaded =&621843 Bytes/Second =&310921, Elapsed Time =2 Second(s) Residual-Data Located at: $01F78000 loaded at: 00005400 0001AFD0 relocated to: 00600000 00615BD0 board data at: 01F78000 01F7EA0C relocated to: 0060F0C0 00615ACC zimage at: 0000F400 0009B20A relocated to: 01EEC000 01F77E0A avail ram: 00400000 00600000 Linux/PPC load: console=tty0 console=ttyS0,9600n8 Uncompressing Linux...done. Now booting the kernel Total memory = 32MB; using 128kB for hash table (at c0180000) Linux version 2.2.0-pre4a (minyard@crchy960.us.nortel.com) (gcc version 2.8.1) #15 Mon Jan 11 17:20:59 CST 1999 Boot arguments: 'console=tty0 console=ttyS0,9600n8' time_init: decrementer frequency = 999938040/60 (15MHz) Calibrating delay loop... 465.31 BogoMIPS Memory: 30792k available (976k kernel code, 928k data, 72k init) [c0000000,c2000000] POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Swansea University Computer Society NET3.039 for Linux 2.1 NET3: Unix domain sockets 0.16 for Linux NET3.038. Swansea University Computer Society TCP/IP for NET3.037 IP Protocols: ICMP, UDP, TCP, IGMP Starting kswapd v 1.5 initialize_kbd: Keyboard reset failed, no ACK Serial driver version 4.27 with<4>Keyboard timeout[2] Keyboard timeout[2] no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 ncr53c8xx: at PCI bus 0, device 16, function 0 ncr53c8xx: 53c825a detected ncr53c825a-0: rev=0x13, base=0x3bfffe00, io_port=0xffffe00, irq=0 ncr53c825a-0: ID 7, Fast-10, Parity Checking ncr53c825a-0: on-chip RAM at 0x3bffe000 ncr53c825a-0: restart (scsi reset). ncr53c825a-0: Downloading SCSI SCRIPTS. scsi0 : ncr53c8xx - revision 3.1d scsi : 1 host. scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00 ncr53c8xx_abort: pid=0 serial_number=1 serial_number_at_timeout=1 [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]