From mboxrd@z Thu Jan 1 00:00:00 1970 In-Reply-To: <199902090234.TAA26936@mx0-smtp.goodnet.com> Date: Tue, 9 Feb 1999 14:11:54 +0100 To: Kyle Nesbit , linuxppc-dev@lists.linuxppc.org From: BenH Subject: Re: L2CR Message-Id: <19990209141154.002518@mail.mipsys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: At this URL: Is a little application that grabs the current L2CR setting under MacOS and puts it in BootX prefs, enabling BootX "Set G3 Cache" option. The L2CR value is then put in the device tree by BootX and retreived later by the kernel. You need a recent kernel for this to work (vger 2.2.x or Paul's ones) and a recent version of BootX too: This tools does a big horrible hack to get the L2CR value (thanks again to Terry Greeniaus for the tips !) so I'm interested in any problem you may encounter. If that works, the kernel should print in the boot messages (look at dmesg) a message like "L2CR overriden (value), backside cache is enabled\n" -- E-Mail: BenH. Web : [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]