From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 19 Feb 1999 20:18:12 -0500 From: Michael Meissner To: Cort Dougan Cc: Matt Porter , Paul.Mackerras@cs.anu.edu.au, Hartmut Koptein , zankel@tarantel.rz.fh-muenchen.de, bh40@calva.net, davidsen@prodigy.com, marsmail@globegate.utm.edu, dvdoug@tiac.net, paubert@iram.es, jskov@cygnus.co.uk, hozer@drgw.net, linuxppc-dev@lists.linuxppc.org Subject: Re: [ppc-dev] Summary: Restructuring Efforts Message-ID: <19990219201812.A2814@wogglebug.cygnus.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: ; from Cort Dougan on Fri, Feb 19, 1999 at 01:21:35PM -0700 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: On Fri, Feb 19, 1999 at 01:21:35PM -0700, Cort Dougan wrote: > > The concern in this discussion (If I'm following along correctly) is RAM > size, that's all. The PReP bootloader works on MTX even though it's not > in the embedded dir. Since RAM is the issue how much RAM does a typical > MTX installed system have? Do they boot from flash or from a hd once > deployed? Note, on my little PowerStack with 48 meg of memory, the new bootloader does not work (as I reported previously -- there are no messages after the prompt). The old bootloader works on the machine, but not on my big Utah PowerStack with 128 meg of memory. > }PReP and CHRP machines are not necessarily desktops/servers. -- Michael Meissner, Cygnus Solutions (Massachusetts office) 4th floor, 955 Massachusetts Avenue, Cambridge, MA 02139, USA meissner@cygnus.com, 617-354-5416 (office), 617-354-7161 (fax) [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]