ANNC: m68k-linux cross-development RPMS for ppc linux

ANNC: m68k-linux cross-development RPMS for ppc linux

[David D. Kilzer]

I've created RPMS of m68k-linux cross-development tools for ppc linux R4
systems (MkLinux and LinuxPPC).  You may download them from the following
FTP site.

ftp://ftp.mac.linux-m68k.org//pub/MacLinux/cross-compile/ppc/

The RPMs and SRPMs are listed below.

binutils-m68k-linux-2.9.1.0.4-1a.ppc.rpm   2203K
egcs-m68k-linux-1.1.1-1a.ppc.rpm           4312K
glibc-m68k-linux-2.0.4-1a.noarch.rpm       2081K

binutils-m68k-linux-2.9.1.0.4-1a.src.rpm   5641K
egcs-m68k-linux-1.1.1-1a.src.rpm          11330K
glibc-m68k-linux-2.0.4-1a.src.rpm          2934K

They were built to facilitate the Macintosh port of the Linux/m68k project,
but feel free to use them however you'd like.

NOTES
-----
  1. After installing glibc-m68k-linux-2.0.4-1a.noarch.rpm, I had to
     rename /usr/m68k-linux/lib/libc.so.6 to
     /usr/m68k-linux/lib/libc.so.6-m68k so that it wouldn't be used when
     I ran a dynamically linked PPC program.  I'm sure I'm doing
     something wrong in the RPM spec file, but I'm not sure what.  Any
     info would be appreciated.

  2. I had to create a patch for the egcs cross compiler to force it to
     use "m68k-linux-as" instead of "as" when doing compiles, otherwise
     I wasn't able to use both the native ppc egcs and the m68k-linux
     egcs at the same time (which is required when making m68k Linux
     kernels under MkLinux or LinuxPPC.  Comments on this patch would
     be appreciated.  I think there is a better way to do it.

This info may also be found on the following web page.

 http://www.mac.linux-m68k.org/docs/ppc-cross-dev-tools.html

Dave
--
David D. Kilzer
ddkilzer@earthlink.net



[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to  Cc linuxppc-dev  if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]

Re: [linux-mac68k] ANNC: m68k-linux cross-development RPMS for ppc linux

[David Huggins-Daines]

On Tue, Mar 02, 1999 at 01:03:14AM -0600, David D. Kilzer wrote:
> egcs-m68k-linux-1.1.1-1a.src.rpm          11330K

So *that's* why I have no more space left in my /home partition :-)

Just thought I'd add that these are mirrored at
http://maclinux.plcom.on.ca/pub/MacLinux/cross-compile/
ftp://maclinux.plcom.on.ca/pub/MacLinux/cross-compile/

which may be faster for commercial sites in eastern Canada (anyone not on
ONet - our connectivity to them is quite bad...) and maybe some other places
too.

Joseph: Can you add this site to the mirrors list?

(It'll be down for a little while on Friday, as we're rearranging the
office, and I want to try out a new Valkyrie kernel...)

Cheers

-- 
"If humans could communicate by telepathy, there would be no need for a 
 phonological component, at least for the purposes of communication." 
              Chomsky, "Categories and Transformations"

[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to  Cc linuxppc-dev  if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]