From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 18 Mar 1999 18:31:01 +0100 To: linuxppc-dev@lists.linuxppc.org From: Benjamin Herrenschmidt Subject: SCSI crashes with vger Message-Id: <19990318183101.012814@mail.mipsys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Both latest vger (2.2.4) and latest paul's kenrel (2.2.2) crash in the NCR53C8XX driverm in ncr_wakeup_done, just after having probed SCSI controllers (the NCR and MESH) and before (or when) probing devices. This configuration used to work well until (and including) 2.2.1. I tried tacking this but I'm a little bit out of time and I don't know the SCSI subsystem very well. The exception reported by xmon is: vector: 700 at pc = c012b010, msr = 81032, sp = c019bbe8 [c019baf8] current = c0199f58, pid = 0, comm = swapper and it crashes somewhere in the swapper task (usual place for crashing ;-) If someone have any clue, I'll continue my tracing on my part but some help would be welcome. I don't have 2.2.1 source handy (to look what changed). -- E-Mail: BenH. Web : [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]