From: massin@col.bsf.alcatel.fr (Raphael Massin)
To: eramdam@kieray1.p.y.ki.era.ericsson.se
Cc: linuxppc-dev@lists.linuxppc.org
Subject: Re: embedded linux
Date: Fri, 9 Apr 1999 12:35:37 +0200 [thread overview]
Message-ID: <199904091035.MAA03310@c5s144.clb> (raw)
> hi there!
>
> it seems like you've come a long way using embedded linux.
> i've got the same problem with libc as you have.
> but no answer, sorry.
> i'm stuck with my kernel.
>
> could you please tell me what kind of board you are using?
> you probably run it on homebuilt hardware, and that brings me
> to my real question:
>
> do you run linux from ata-disk or via nfs and linux works?
My turn to be sorry:-), i run linux without hard drive nor nfs.
> i've got a mbx-board that runs linux without any problems.
> the other motorola boards (fads, ads), they all hang using
> nfs-root or using ata-flash.
>
> i've written the boot-code myself.
>
> have you written the boot-code for the 860 yourself
Yes, in fact on my board, the zvmlinux is loaded via a backpannel
and uses a RAM file system as root file system (the ram file system code
has been modified to get its image from a section in the vmlinux image)
> and do you have any experience you would like to share with me?
I can do nothing for your ata-disk or nfs, but i would be pleased to help
> i think my problem is that i don't get any page-faults when loading binaries.
??
>
> thanks /
>
> magnus
Raphael
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
next reply other threads:[~1999-04-09 10:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-04-09 10:35 Raphael Massin [this message]
-- strict thread matches above, loose matches on Subject: below --
2000-01-25 15:47 Embedded Linux Ruedi.Hofer
2000-01-25 19:07 ` Alexander S. Guy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=199904091035.MAA03310@c5s144.clb \
--to=massin@col.bsf.alcatel.fr \
--cc=eramdam@kieray1.p.y.ki.era.ericsson.se \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).