From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 9 Apr 1999 12:35:37 +0200 From: massin@col.bsf.alcatel.fr (Raphael Massin) Message-Id: <199904091035.MAA03310@c5s144.clb> To: eramdam@kieray1.p.y.ki.era.ericsson.se Subject: Re: embedded linux Cc: linuxppc-dev@lists.linuxppc.org Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: > hi there! > > it seems like you've come a long way using embedded linux. > i've got the same problem with libc as you have. > but no answer, sorry. > i'm stuck with my kernel. > > could you please tell me what kind of board you are using? > you probably run it on homebuilt hardware, and that brings me > to my real question: > > do you run linux from ata-disk or via nfs and linux works? My turn to be sorry:-), i run linux without hard drive nor nfs. > i've got a mbx-board that runs linux without any problems. > the other motorola boards (fads, ads), they all hang using > nfs-root or using ata-flash. > > i've written the boot-code myself. > > have you written the boot-code for the 860 yourself Yes, in fact on my board, the zvmlinux is loaded via a backpannel and uses a RAM file system as root file system (the ram file system code has been modified to get its image from a section in the vmlinux image) > and do you have any experience you would like to share with me? I can do nothing for your ata-disk or nfs, but i would be pleased to help > i think my problem is that i don't get any page-faults when loading binaries. ?? > > thanks / > > magnus Raphael [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]