From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <199905170728.JAA03775@denx.muc.de> To: Tom Rini cc: linuxppc-dev@lists.linuxppc.org, dev@kernel.crashing.org From: Wolfgang Denk Subject: Re: LinuxPPC-DR-1.0: X11 config for Powerbook G3 series? Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Sun, 16 May 1999 20:50:26 EDT." Date: Mon, 17 May 1999 09:28:01 +0200 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi, in message you write: > > > (--) FBDev: Mode "1024x768" needs hsync freq of 93.99 kHz. Deleted. > ... > > [root@luke X11]# cat XF86Config > ... > > HorizSync 119 > > Change that. Doing this, the next error message is "needs vsync freq of 116.32 Hz". Changing this parameter also gives: XF86Config: /usr/X11R6/lib/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keycodes: "macintosh" (**) XKB: types: "default" (**) XKB: compat: "default" (**) XKB: symbols: "macintosh/us" (**) XKB: geometry: "macintosh" (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) Mouse: type: BusMouse, device: /dev/mouse, buttons: 3 (**) Mouse: 3 button emulation (timeout: 50ms) (**) FBDev: Graphics device ID: "OFfb ATY,RageLT" (**) FBDev: Monitor ID: "Apple PowerBook G3" (**) FontPath set to "unix/:-1" (**) FBDev: Using XF86Config video mode database Fatal server error: No valid modes found. Sigh... as long as X11 configuration stays this error prone Linux will have hard times to beat M$. Wolfgang -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de "I haven't lost my mind - it's backed up on tape somewhere." [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]