* PCCARD/PCMCIA support
@ 1999-07-20 0:13 Jon Martinsson
1999-07-23 9:24 ` Hubert Figuiere
0 siblings, 1 reply; 3+ messages in thread
From: Jon Martinsson @ 1999-07-20 0:13 UTC (permalink / raw)
To: ppc-dev
[-- Attachment #1: Type: text/plain, Size: 281 bytes --]
Hi,
1) Would it technically be possible use a PCCARD/PCMCIA network/modem card on my Macintosh powerbook (assuming that one implemented the required drivers for the card in the Kernel. 2) Do I also need a driver for the PCCARD/PCMCIA bridge on the moderboard?
Rgrds
Jon
[-- Attachment #2: Type: text/html, Size: 774 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PCCARD/PCMCIA support
1999-07-20 0:13 PCCARD/PCMCIA support Jon Martinsson
@ 1999-07-23 9:24 ` Hubert Figuiere
1999-07-23 14:07 ` Mark S. Mathews
0 siblings, 1 reply; 3+ messages in thread
From: Hubert Figuiere @ 1999-07-23 9:24 UTC (permalink / raw)
To: Jon Martinsson; +Cc: ppc-dev
According to Jon Martinsson <jon_m_martinsson@swipnet.se>:
> Hi,
>
> 1) Would it technically be possible use a PCCARD/PCMCIA network/modem card on my Macintosh powerbook (assuming that one implemented the required drivers for the card in the Kernel. 2) Do I also need a driver for the PCCARD/PCMCIA bridge on the moderboard?
>
PCMCIA works well on PowerBook 3400c (the on I tried).
Hub
PS: please don't post HTML.
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PCCARD/PCMCIA support
1999-07-23 9:24 ` Hubert Figuiere
@ 1999-07-23 14:07 ` Mark S. Mathews
0 siblings, 0 replies; 3+ messages in thread
From: Mark S. Mathews @ 1999-07-23 14:07 UTC (permalink / raw)
To: Hubert Figuiere; +Cc: Jon Martinsson, ppc-dev
pcmcia also runs well on my G3.
-Mark
On Fri, 23 Jul 1999, Hubert Figuiere wrote:
>
> According to Jon Martinsson <jon_m_martinsson@swipnet.se>:
> > Hi,
> >
> > 1) Would it technically be possible use a PCCARD/PCMCIA network/modem card on my Macintosh powerbook (assuming that one implemented the required drivers for the card in the Kernel. 2) Do I also need a driver for the PCCARD/PCMCIA bridge on the moderboard?
> >
>
>
> PCMCIA works well on PowerBook 3400c (the on I tried).
>
>
> Hub
>
> PS: please don't post HTML.
Mark S. Mathews
AbsoluteValue Software Web: http://www.absoval.com
P.O. Box 941149 e-mail: mark@absoval.com
Maitland, FL 32794-1149 Phone: 407.644.8582
USA Fax: 407.539.1294
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~1999-07-23 14:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-07-20 0:13 PCCARD/PCMCIA support Jon Martinsson
1999-07-23 9:24 ` Hubert Figuiere
1999-07-23 14:07 ` Mark S. Mathews
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).