From: "Giuliano Pochini" <pochini@denise.shiny.it>
To: toa@pop.agri.ch
Cc: linuxppc-dev@lists.linuxppc.org, x-linux-kernel@vger.rutgers.edu
Subject: Re: MO-Disk on PPC with 53C94 SCSI-chip
Date: Thu, 19 Aug 1999 22:45:46 CEST [thread overview]
Message-ID: <199908201732.TAA09408@mail.shiny.it> (raw)
>I have a LinuxPPC R5 system running on a PowerMac 7200 with the
>2.2.12pre8 kernel.
[...]
>I can create a fs on the partiton, I can read/write from/to it. BUT,
>when I try to change the side of the media I get the same fs tree as
on
>the first side.
Some removable medias don't tell Linux when you change the disk. The
easies way to make it work is to try to mount the device before
reinserting a new disk (you'll get some orrors of course... ignore
them), so Linux notices you changed it.
>So I tried booting without media in to verify if it works on the clean
>way. This what the dmesg says:
[...]
Strange. I get a "READ CAPACITY failed, blah blah blah", but then all
works fine.
[PMac 7300, MO Fujitsu 640MB on ext. SCSI bus]
Bye.
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
next reply other threads:[~1999-08-19 20:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-08-19 20:45 Giuliano Pochini [this message]
-- strict thread matches above, loose matches on Subject: below --
1999-08-19 18:08 MO-Disk on PPC with 53C94 SCSI-chip Andreas Tobler
1999-08-20 18:41 ` Sriranga Veeraraghavan
1999-08-23 14:02 ` Jerry Quinn
1999-09-06 11:23 ` Andreas Tobler
1999-09-06 19:31 ` Simon Piette
1999-09-07 0:43 ` Paul Mackerras
1999-09-07 18:59 ` Jerry Quinn
1999-09-08 0:44 ` Paul Mackerras
1999-09-08 1:13 ` Joshua M. Thompson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=199908201732.TAA09408@mail.shiny.it \
--to=pochini@denise.shiny.it \
--cc=linuxppc-dev@lists.linuxppc.org \
--cc=toa@pop.agri.ch \
--cc=x-linux-kernel@vger.rutgers.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).