From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <199908310616.IAA00299@piglet.cpu.lu> Date: Tue, 31 Aug 1999 08:16:35 +0200 (CEST) From: Michel Lanners Reply-To: mlan@cpu.lu Subject: Re: SMP support for Daystar 604e 200MHz dual-processor card To: ddkilzer@computer.org cc: linuxppc-dev@lists.linuxppc.org In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/plain; CHARSET=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi there, On 31 Aug, this message from David D. Kilzer echoed through cyberspace: > Here's what's left of the boot messages on the screen in 2.2.12 from > CVS that I compiled on Aug 29, 1999: > [snip] > Console: switching to colour frame buffer device 104x39 > fb0: control display adapter > ADB keyboard at 2, handler set to 3 > ADB mouse at 3, handler set to 2 > Serial driver version 4.27 with no serial options enabled ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > Machine check in kernel mode. This might be a shot in the dark, but I never heard of anyone successfully compiling in standard serial support on the PowerMacs. I tried it myself; I would get a panic upon initializing the serial driver (exactly like above..). So you might want to disable standard serial suport, and recompile... Michel ------------------------------------------------------------------------- Michel Lanners | " Read Philosophy. Study Art. 23, Rue Paul Henkes | Ask Questions. Make Mistakes. L-1710 Luxembourg | email mlan@cpu.lu | http://www.cpu.lu/~mlan | Learn Always. " [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]