From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <19990922174605.27906.rocketmail@web122.yahoomail.com> Date: Wed, 22 Sep 1999 10:46:05 -0700 (PDT) From: David Hay Reply-To: hay@colorado.edu Subject: Re: USB driver not detecting mouse? (lots of detail) To: Ira K Weiny Cc: linuxdev MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: --- Ira K Weiny wrote: > I just got my USB mouse working!!!! Congrats ;) > I am loading (insmod) what I call usb-card-driver which in a makefile I > wrote > includes the following. ohci.o usb.o ohci-debug.o usb-debug.o > > I then load mouse.o on top of that. I just noticed that I compiled the > hub.c > but I did not load it and the mouse is working. But I have a 2-port card > which is just a root hub and I think hub.c is just for the extention hubs > only. > AFAIK I belive this is correct. I've been loading usbcore.o, usb-ohci.o and the mouse.o. Well, I usually don't load mouse, because when I load usb-ohci, it only sees a single hub with no devices attached, so when mouse.o hits usb_register, it can't find a mouse device to register the driver with. :( > What I did differently to get it to work was just the XF68Config file. I > read > the USB-HOWTO and set it up acording to that. So I have really done > nothing > other than compile the modules and then load them with insmod. I have not > set > up the modules directory and conf.modules yet. I think I know what I need to do with the XF68Config file to get the mouse working, but until I can get the driver to see the mouse, I'm going to stick with my ADB mouse :( ===== ------------------------------------------------------------ David Hay \|/ ____ \|/ hay@colorado.edu ~@-/ oO \-@~ http://home.earthlink.net/~dhay/ /_( \__/ )_\ ~ Live well ~ Laugh often ~ Love much ~ \__U_/ ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/