RC5 client and LPPC R5

RC5 client and LPPC R5

[Justin Shore]

Has anyone gotten the two to mix successfully?  One of the binaries I 
tried died right off the bat.  The second worked fine for basically 
everything except for when it tried to access the key server for a 
new set of blocks to hack on (basically it works except for network 
access).  I emailed distributed about a month back and never got a 
response.  Has anyone gotten it to work with R5?  I can't remember 
the specific error.  I think it just bitched about not being able to 
resolve the DNS for the key server.  If ya know something please let 
me know.  Thanks!

Justin

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

Re: RC5 client and LPPC R5

[schinder]

On Fri, Oct 15, 1999 at 02:39:01AM -0500, Justin Shore wrote:
} 
} Has anyone gotten the two to mix successfully?  One of the binaries I 

Yes.  I'm using 2.7100.412.

} tried died right off the bat.  The second worked fine for basically 
} everything except for when it tried to access the key server for a 
} new set of blocks to hack on (basically it works except for network 
} access).  I emailed distributed about a month back and never got a 
} response.  Has anyone gotten it to work with R5?  I can't remember 
} the specific error.  I think it just bitched about not being able to 
} resolve the DNS for the key server.  If ya know something please let 
} me know.  Thanks!

If that's what it bitched about, it sounds like you have something set
up incorrectly.  Anyway, I don't remember where exactly I got the one
I'm using, but a quick check shows there's an rpm on the Yellow Dog CS
1.1 install CD, so it must be on their site.  I don't see it on my
LinuxPPC Q3 install CD, but it might be on the other one, and I'll bet
they have it somewhere on linuxppc.com.

} 
} Justin
} 

-- 
Paul Schinder
schinder@pobox.com

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

Re: RC5 client and LPPC R5

[Justin Shore]

>
>If that's what it bitched about, it sounds like you have something set
>up incorrectly.  Anyway, I don't remember where exactly I got the one
>I'm using, but a quick check shows there's an rpm on the Yellow Dog CS
>1.1 install CD, so it must be on their site.  I don't see it on my
>LinuxPPC Q3 install CD, but it might be on the other one, and I'll bet
>they have it somewhere on linuxppc.com.

All other aspects of networking are working fine with the machine. 
Even with a base installation without any fiddling other than 
configuring the network it died.  I've verified that on more than one 
machine too.  I'll give that YD rpm a try.  I believe I mirror that 
as well.  Thanks!

Justin


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/