From: Balamuruhan S <bala24@linux.ibm.com>
To: Jordan Niethe <jniethe5@gmail.com>, linuxppc-dev@lists.ozlabs.org
Cc: alistair@popple.id.au, npiggin@gmail.com, dja@axtens.net
Subject: Re: [PATCH v5 08/21] powerpc: Introduce functions for instruction equality
Date: Tue, 07 Apr 2020 13:07:42 +0530 [thread overview]
Message-ID: <1a99be1860ca76bf48a6eac8687488b6c41d2c87.camel@linux.ibm.com> (raw)
In-Reply-To: <20200406080936.7180-9-jniethe5@gmail.com>
On Mon, 2020-04-06 at 18:09 +1000, Jordan Niethe wrote:
> In preparation for an instruction data type that can not be directly
> used with the '==' operator use functions for checking equality.
LGTM except one comment below, otherwise
Reviewed-by: Balamuruhan S <bala24@linux.ibm.com>
>
> Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
> ---
> v5: Remove ppc_inst_null()
> ---
> arch/powerpc/include/asm/inst.h | 5 +++++
> arch/powerpc/kernel/trace/ftrace.c | 15 ++++++++-------
> arch/powerpc/lib/code-patching.c | 12 ++++++------
> arch/powerpc/lib/test_emulate_step.c | 2 +-
> arch/powerpc/xmon/xmon.c | 4 ++--
> 5 files changed, 22 insertions(+), 16 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/inst.h
> b/arch/powerpc/include/asm/inst.h
> index 78eb1481f1f6..54ee46b0a7c9 100644
> --- a/arch/powerpc/include/asm/inst.h
> +++ b/arch/powerpc/include/asm/inst.h
> @@ -23,4 +23,9 @@ static inline u32 ppc_inst_swab(u32 x)
> return ppc_inst(swab32(ppc_inst_val(x)));
> }
>
> +static inline bool ppc_inst_equal(u32 x, u32 y)
> +{
> + return x == y;
> +}
> +
> #endif /* _ASM_INST_H */
> diff --git a/arch/powerpc/kernel/trace/ftrace.c
> b/arch/powerpc/kernel/trace/ftrace.c
> index 62ff429bddc4..784b5746cc55 100644
> --- a/arch/powerpc/kernel/trace/ftrace.c
> +++ b/arch/powerpc/kernel/trace/ftrace.c
> @@ -72,7 +72,7 @@ ftrace_modify_code(unsigned long ip, unsigned int old,
> unsigned int new)
> return -EFAULT;
>
> /* Make sure it is what we expect it to be */
> - if (replaced != old) {
> + if (!ppc_inst_equal(replaced, old)) {
> pr_err("%p: replaced (%#x) != old (%#x)",
> (void *)ip, ppc_inst_val(replaced), ppc_inst_val(old));
> return -EINVAL;
> @@ -170,7 +170,8 @@ __ftrace_make_nop(struct module *mod,
> }
>
> /* We expect either a mflr r0, or a std r0, LRSAVE(r1) */
> - if (op != ppc_inst(PPC_INST_MFLR) && op != ppc_inst(PPC_INST_STD_LR)) {
> + if (!ppc_inst_equal(op, ppc_inst(PPC_INST_MFLR)) &&
> + !ppc_inst_equal(op, ppc_inst(PPC_INST_STD_LR))) {
> pr_err("Unexpected instruction %08x around bl _mcount\n",
> ppc_inst_val(op));
> return -EINVAL;
> }
> @@ -200,7 +201,7 @@ __ftrace_make_nop(struct module *mod,
> return -EFAULT;
> }
>
> - if (op != ppc_inst(PPC_INST_LD_TOC)) {
> + if (!ppc_inst_equal(op, ppc_inst(PPC_INST_LD_TOC))) {
> pr_err("Expected %08x found %08x\n", PPC_INST_LD_TOC,
> ppc_inst_val(op));
> return -EINVAL;
> }
> @@ -497,7 +498,7 @@ expected_nop_sequence(void *ip, unsigned int op0,
> unsigned int op1)
> * The load offset is different depending on the ABI. For simplicity
> * just mask it out when doing the compare.
> */
> - if ((op0 != ppc_inst(0x48000008)) || (ppc_inst_val(op1) & 0xffff0000)
> != 0xe8410000)
> + if ((!ppc_inst_equal(op0), ppc_inst(0x48000008)) || (ppc_inst_val(op1)
> & 0xffff0000) != 0xe8410000)
> return 0;
> return 1;
> }
> @@ -506,7 +507,7 @@ static int
> expected_nop_sequence(void *ip, unsigned int op0, unsigned int op1)
> {
> /* look for patched "NOP" on ppc64 with -mprofile-kernel */
> - if (op0 != ppc_inst(PPC_INST_NOP))
> + if (!ppc_inst_equal(op0, ppc_inst(PPC_INST_NOP)))
> return 0;
> return 1;
> }
> @@ -589,7 +590,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long
> addr)
> return -EFAULT;
>
> /* It should be pointing to a nop */
> - if (op != ppc_inst(PPC_INST_NOP)) {
> + if (!ppc_inst_equal(op, ppc_inst(PPC_INST_NOP))) {
> pr_err("Expected NOP but have %x\n", op);
> return -EINVAL;
> }
> @@ -646,7 +647,7 @@ static int __ftrace_make_call_kernel(struct dyn_ftrace
> *rec, unsigned long addr)
> return -EFAULT;
> }
>
> - if (op != ppc_inst(PPC_INST_NOP)) {
> + if (!ppc_inst_equal(op, ppc_inst(PPC_INST_NOP))) {
> pr_err("Unexpected call sequence at %p: %x\n", ip,
> ppc_inst_val(op));
> return -EINVAL;
> }
> diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-
> patching.c
> index 3f88d2a4400c..33654c6334a9 100644
> --- a/arch/powerpc/lib/code-patching.c
> +++ b/arch/powerpc/lib/code-patching.c
> @@ -478,7 +478,7 @@ static void __init test_branch_iform(void)
> /* Check flags are masked correctly */
> err = create_branch(&instr, &instr, addr, 0xFFFFFFFC);
> check(instr_is_branch_to_addr(&instr, addr));
> - check(instr == ppc_inst(0x48000000));
> + check(ppc_inst_equal(instr, ppc_inst(0x48000000)));
> }
>
> static void __init test_create_function_call(void)
> @@ -563,7 +563,7 @@ static void __init test_branch_bform(void)
> /* Check flags are masked correctly */
> err = create_cond_branch(&instr, iptr, addr, 0xFFFFFFFC);
> check(instr_is_branch_to_addr(&instr, addr));
> - check(instr == ppc_inst(0x43FF0000));
> + check(ppc_inst_equal(instr, ppc_inst(0x43FF0000)));
> }
>
> static void __init test_translate_branch(void)
> @@ -597,7 +597,7 @@ static void __init test_translate_branch(void)
> patch_instruction(q, instr);
> check(instr_is_branch_to_addr(p, addr));
> check(instr_is_branch_to_addr(q, addr));
> - check(*q == ppc_inst(0x4a000000));
> + check(ppc_inst_equal(*q, ppc_inst(0x4a000000)));
>
> /* Maximum positive case, move x to x - 32 MB + 4 */
> p = buf + 0x2000000;
> @@ -608,7 +608,7 @@ static void __init test_translate_branch(void)
> patch_instruction(q, instr);
> check(instr_is_branch_to_addr(p, addr));
> check(instr_is_branch_to_addr(q, addr));
> - check(*q == ppc_inst(0x49fffffc));
> + check(ppc_inst_equal(*q, ppc_inst(0x49fffffc)));
>
> /* Jump to x + 16 MB moved to x + 20 MB */
> p = buf;
> @@ -654,7 +654,7 @@ static void __init test_translate_branch(void)
> patch_instruction(q, instr);
> check(instr_is_branch_to_addr(p, addr));
> check(instr_is_branch_to_addr(q, addr));
> - check(*q == ppc_inst(0x43ff8000));
> + check(ppc_inst_equal(*q, ppc_inst(0x43ff8000)));
>
> /* Maximum positive case, move x to x - 32 KB + 4 */
> p = buf + 0x8000;
> @@ -666,7 +666,7 @@ static void __init test_translate_branch(void)
> patch_instruction(q, instr);
> check(instr_is_branch_to_addr(p, addr));
> check(instr_is_branch_to_addr(q, addr));
> - check(*q == ppc_inst(0x43ff7ffc));
> + check(ppc_inst_equal(*q, ppc_inst(0x43ff7ffc)));
>
> /* Jump to x + 12 KB moved to x + 20 KB */
> p = buf;
> diff --git a/arch/powerpc/lib/test_emulate_step.c
> b/arch/powerpc/lib/test_emulate_step.c
> index 60f7eb24d742..16387a9bfda0 100644
> --- a/arch/powerpc/lib/test_emulate_step.c
> +++ b/arch/powerpc/lib/test_emulate_step.c
> @@ -865,7 +865,7 @@ static int __init execute_compute_instr(struct pt_regs
> *regs,
> extern int exec_instr(struct pt_regs *regs);
> extern s32 patch__exec_instr;
>
> - if (!regs || !instr)
> + if (!regs || !ppc_inst_val(instr))
This change should go in to below patch,
[PATCH v5 06/21] powerpc: Use an accessor for instructions
-- Bala
> return -EINVAL;
>
> /* Patch the NOP with the actual instruction */
> diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
> index 3c1fb46bfacf..f6c87d3d53ea 100644
> --- a/arch/powerpc/xmon/xmon.c
> +++ b/arch/powerpc/xmon/xmon.c
> @@ -950,7 +950,7 @@ static void remove_bpts(void)
> if ((bp->enabled & (BP_TRAP|BP_CIABR)) != BP_TRAP)
> continue;
> if (mread(bp->address, &instr, 4) == 4
> - && instr == ppc_inst(bpinstr)
> + && ppc_inst_equal(instr, ppc_inst(bpinstr))
> && patch_instruction(
> (unsigned int *)bp->address, bp->instr[0]) != 0)
> printf("Couldn't remove breakpoint at %lx\n",
> @@ -2860,7 +2860,7 @@ generic_inst_dump(unsigned long adr, long count, int
> praddr,
> break;
> }
> inst = ppc_inst(GETWORD(val));
> - if (adr > first_adr && inst == last_inst) {
> + if (adr > first_adr && ppc_inst_equal(inst, last_inst)) {
> if (!dotted) {
> printf(" ...\n");
> dotted = 1;
next prev parent reply other threads:[~2020-04-07 7:39 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-06 8:09 [PATCH v5 00/21] Initial Prefixed Instruction support Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 01/21] powerpc/xmon: Remove store_inst() for patch_instruction() Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 02/21] powerpc/xmon: Move out-of-line instructions to text section Jordan Niethe
2020-04-07 6:45 ` Balamuruhan S
2020-04-09 6:11 ` Christophe Leroy
2020-04-09 7:26 ` Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 03/21] powerpc: Change calling convention for create_branch() et. al Jordan Niethe
2020-04-06 10:25 ` kbuild test robot
2020-04-07 6:10 ` Balamuruhan S
2020-04-07 6:35 ` Jordan Niethe
2020-04-07 6:59 ` Balamuruhan S
2020-04-06 8:09 ` [PATCH v5 04/21] powerpc: Use a macro for creating instructions from u32s Jordan Niethe
2020-04-07 6:40 ` Balamuruhan S
2020-04-07 8:27 ` Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 05/21] powerpc: Use a function for getting the instruction op code Jordan Niethe
2020-04-06 8:22 ` Christophe Leroy
2020-04-06 9:38 ` Jordan Niethe
2020-04-07 7:04 ` Balamuruhan S
2020-04-07 8:32 ` Jordan Niethe
2020-04-08 18:21 ` Segher Boessenkool
2020-04-09 4:48 ` Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 06/21] powerpc: Use an accessor for instructions Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 07/21] powerpc: Use a function for byte swapping instructions Jordan Niethe
2020-04-07 7:42 ` Balamuruhan S
2020-04-06 8:09 ` [PATCH v5 08/21] powerpc: Introduce functions for instruction equality Jordan Niethe
2020-04-07 7:37 ` Balamuruhan S [this message]
2020-04-06 8:09 ` [PATCH v5 09/21] powerpc: Use a datatype for instructions Jordan Niethe
2020-04-06 10:34 ` kbuild test robot
2020-04-06 10:35 ` kbuild test robot
2020-04-07 10:30 ` Balamuruhan S
2020-04-08 2:11 ` Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 10/21] powerpc: Use a function for reading instructions Jordan Niethe
2020-04-07 10:42 ` Balamuruhan S
2020-04-06 8:09 ` [PATCH v5 11/21] powerpc: Define and use __get_user_instr{, inatomic}() Jordan Niethe
2020-04-07 10:48 ` Balamuruhan S
2020-04-08 2:13 ` Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 12/21] powerpc: Introduce a function for reporting instruction length Jordan Niethe
2020-04-07 11:14 ` Balamuruhan S
2020-04-08 2:14 ` Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 13/21] powerpc/xmon: Use a function for reading instructions Jordan Niethe
2020-04-07 11:30 ` Balamuruhan S
2020-04-08 2:18 ` Jordan Niethe
2020-04-09 5:04 ` Balamuruhan S
2020-04-09 5:14 ` Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 14/21] powerpc/xmon: Move insertion of breakpoint for xol'ing Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 15/21] powerpc: Make test_translate_branch() independent of instruction length Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 16/21] powerpc: Enable Prefixed Instructions Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 17/21] powerpc: Define new SRR1 bits for a future ISA version Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 18/21] powerpc64: Add prefixed instructions to instruction data type Jordan Niethe
2020-04-06 9:52 ` Alistair Popple
2020-04-06 10:25 ` Christophe Leroy
2020-04-06 11:13 ` Jordan Niethe
2020-04-08 18:11 ` Segher Boessenkool
2020-04-08 18:43 ` Christophe Leroy
2020-04-06 10:42 ` Jordan Niethe
2020-04-07 1:39 ` Alistair Popple
2020-04-06 11:04 ` kbuild test robot
2020-04-13 12:04 ` Balamuruhan S
2020-04-15 4:40 ` Jordan Niethe
2020-04-15 8:14 ` Balamuruhan S
2020-04-06 8:09 ` [PATCH v5 19/21] powerpc: Support prefixed instructions in alignment handler Jordan Niethe
2020-04-06 8:09 ` [PATCH v5 20/21] powerpc sstep: Add support for prefixed load/stores Jordan Niethe
2020-04-06 11:29 ` kbuild test robot
2020-04-06 8:09 ` [PATCH v5 21/21] powerpc sstep: Add support for prefixed fixed-point arithmetic Jordan Niethe
2020-04-09 6:39 ` [PATCH v5 00/21] Initial Prefixed Instruction support Christophe Leroy
2020-04-09 7:28 ` Jordan Niethe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1a99be1860ca76bf48a6eac8687488b6c41d2c87.camel@linux.ibm.com \
--to=bala24@linux.ibm.com \
--cc=alistair@popple.id.au \
--cc=dja@axtens.net \
--cc=jniethe5@gmail.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=npiggin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).