Re: [PATCH v9 14/26] powerpc/powernv/ioda1: Introduce PNV_IODA1_DMA32_SEGSIZE

[Alexey Kardashevskiy <aik@ozlabs.ru>]

On 05/03/2016 03:41 PM, Gavin Shan wrote:
> Currently, there is one macro (TCE32_TABLE_SIZE) representing the
> TCE table size for one DMA32 segment. The constant representing
> the DMA32 segment size (1 << 28) is still used in the code.
>
> This defines PNV_IODA1_DMA32_SEGSIZE representing one DMA32
> segment size. the TCE table size can be calcualted when the page
> has fixed 4KB size. So all the related calculation depends on one
> macro (PNV_IODA1_DMA32_SEGSIZE). No logical changes introduced.
>
> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>

Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>

> ---
>  arch/powerpc/platforms/powernv/pci-ioda.c | 31 ++++++++++++++++++-------------
>  1 file changed, 18 insertions(+), 13 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index f27a62d..ca034b8 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -50,9 +50,7 @@
>
>  #define PNV_IODA1_M64_NUM	16	/* Number of M64 BARs	*/
>  #define PNV_IODA1_M64_SEGS	8	/* Segments per M64 BAR	*/
> -
> -/* 256M DMA window, 4K TCE pages, 8 bytes TCE */
> -#define TCE32_TABLE_SIZE	((0x10000000 / 0x1000) * 8)
> +#define PNV_IODA1_DMA32_SEGSIZE	0x10000000
>
>  #define POWERNV_IOMMU_DEFAULT_LEVELS	1
>  #define POWERNV_IOMMU_MAX_LEVELS	5
> @@ -2037,7 +2035,7 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
>
>  	struct page *tce_mem = NULL;
>  	struct iommu_table *tbl;
> -	unsigned int i;
> +	unsigned int tce32_segsz, i;
>  	int64_t rc;
>  	void *addr;
>
> @@ -2057,29 +2055,34 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
>  	/* Grab a 32-bit TCE table */
>  	pe->tce32_seg = base;
>  	pe_info(pe, " Setting up 32-bit TCE table at %08x..%08x\n",
> -		(base << 28), ((base + segs) << 28) - 1);
> +		base * PNV_IODA1_DMA32_SEGSIZE,
> +		(base + segs) * PNV_IODA1_DMA32_SEGSIZE - 1);
>
>  	/* XXX Currently, we allocate one big contiguous table for the
>  	 * TCEs. We only really need one chunk per 256M of TCE space
>  	 * (ie per segment) but that's an optimization for later, it
>  	 * requires some added smarts with our get/put_tce implementation
> +	 *
> +	 * Each TCE page is 4KB in size and each TCE entry occupies 8
> +	 * bytes
>  	 */
> +	tce32_segsz = PNV_IODA1_DMA32_SEGSIZE >> (IOMMU_PAGE_SHIFT_4K - 3);
>  	tce_mem = alloc_pages_node(phb->hose->node, GFP_KERNEL,
> -				   get_order(TCE32_TABLE_SIZE * segs));
> +				   get_order(tce32_segsz * segs));
>  	if (!tce_mem) {
>  		pe_err(pe, " Failed to allocate a 32-bit TCE memory\n");
>  		goto fail;
>  	}
>  	addr = page_address(tce_mem);
> -	memset(addr, 0, TCE32_TABLE_SIZE * segs);
> +	memset(addr, 0, tce32_segsz * segs);
>
>  	/* Configure HW */
>  	for (i = 0; i < segs; i++) {
>  		rc = opal_pci_map_pe_dma_window(phb->opal_id,
>  					      pe->pe_number,
>  					      base + i, 1,
> -					      __pa(addr) + TCE32_TABLE_SIZE * i,
> -					      TCE32_TABLE_SIZE, 0x1000);
> +					      __pa(addr) + tce32_segsz * i,
> +					      tce32_segsz, IOMMU_PAGE_SIZE_4K);
>  		if (rc) {
>  			pe_err(pe, " Failed to configure 32-bit TCE table,"
>  			       " err %ld\n", rc);
> @@ -2088,8 +2091,9 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
>  	}
>
>  	/* Setup linux iommu table */
> -	pnv_pci_setup_iommu_table(tbl, addr, TCE32_TABLE_SIZE * segs,
> -				  base << 28, IOMMU_PAGE_SHIFT_4K);
> +	pnv_pci_setup_iommu_table(tbl, addr, tce32_segsz * segs,
> +				  base * PNV_IODA1_DMA32_SEGSIZE,
> +				  IOMMU_PAGE_SHIFT_4K);
>
>  	/* OPAL variant of P7IOC SW invalidated TCEs */
>  	if (phb->ioda.tce_inval_reg)
> @@ -2119,7 +2123,7 @@ static void pnv_pci_ioda1_setup_dma_pe(struct pnv_phb *phb,
>  	if (pe->tce32_seg >= 0)
>  		pe->tce32_seg = -1;
>  	if (tce_mem)
> -		__free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
> +		__free_pages(tce_mem, get_order(tce32_segsz * segs));
>  	if (tbl) {
>  		pnv_pci_unlink_table_and_group(tbl, &pe->table_group);
>  		iommu_free_table(tbl, "pnv");
> @@ -3456,7 +3460,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>  	mutex_init(&phb->ioda.pe_list_mutex);
>
>  	/* Calculate how many 32-bit TCE segments we have */
> -	phb->ioda.tce32_count = phb->ioda.m32_pci_base >> 28;
> +	phb->ioda.tce32_count = phb->ioda.m32_pci_base /
> +				PNV_IODA1_DMA32_SEGSIZE;
>
>  #if 0 /* We should really do that ... */
>  	rc = opal_pci_set_phb_mem_window(opal->phb_id,
>


-- 
Alexey