From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <20000209091331.4718.qmail@web207.mail.yahoo.com> Date: Wed, 9 Feb 2000 01:13:31 -0800 (PST) From: Sebastien Articlaux Subject: CUSTOM MP860 PowerQuiccMH BOARD-Need help to program Flash To: linuxppc-embedded@lists.linuxppc.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hello all PPC man, I am a student working for MATRA SI in electronic section We want to run linuxppc on a custom MPC860 PowerQuiccMH board diskless,networless with 64Mo DRAM and 4Mo Flash. We use EST VisionProbe to debbug and download files into Flash and RAM. Sebastien Tadeoni who worked before me had built vmlinuw.initrd with embedded 2.2.5 and now my job is to download it to the Flash and try to boot... our Flash start at 0x0 to 0x3FFFFF RAM start at 0x8000000 But my problem is that when I convert vmlinux.initrd (1.11 Mega, ELF Format) to a *.BIN (Our emulator EST Vision Probe convert it to a BIN format before downloading into the Flash) there is only 26K of program code in the Flash which start at 0x100000 I try to add some BIAS before download but it's the same. Do you know what? How can be sure that my file vmlinux.initrd(ELF Format) and my .BIN are correct ? I think .BIN is not good but i'm not sure... What do you think about that? Thank you in advance for your help. Sebastien ARTICLAUX ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/