From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <200003140918.JAA19674@hyperion.valhalla.net> Date: Tue, 14 Mar 2000 09:18:17 +0000 Subject: Different Mac Models. From: "Iain Sandoe" To: linuxppc-dev@lists.linuxppc.org Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hello All, I new to the list so apologies if this is a bit dumb. Is there a cross-reference matrix anywhere between Mac Machine IDs (the one you can get out of system profiler) and the required kernel build config flags? Preferably ;) by kernel version. I have G3 minitower (Apple UW scsi), G3 PB (although if it's a "1999" or "lombard" beats me) & a 9600/233 604. I succeeded (by trial & error) to find the right combinations to build 2.2.14p9 on both G3 & PB (but never got the USB mouse working on the PB, and the trackpad is frustratingly fast to say the least)... and then had to spend some time of paid work - restarted last week... I am about to (if it hasn't been claimed already) think about doing an ALSA driver for pmac internal sound. I have (just about) succeeded in getting the latest (yesterday) rsyncs (2.3.51) from linuxcare to build and boot on the G3 minitower - although I had to leave a lot of PB stuff in to get it to build. However, (I appreciate this is not going to be helpful so I don't expect an answer) once X (Xpmac rev 6) is up the machine stops dead after a few minutes... three finger salute required to get anywhere :( Would I be better off sticking with the 2.2.XX tree for ALSA driver development - or should I be in amongst the 2.3.xx tree? I think this is a PPC rather than ALSA question (?). regards, Iain. ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/