From: Sven LUTHER <luther@debian.org>
To: Michael Schmitz <schmitz@opal.biophys.uni-duesseldorf.de>
Cc: Albrecht Dreß <ad@mpifr-bonn.mpg.de>,
Tim Wojtulewicz <Tim.Wojtulewicz@nau.edu>,
linuxppc-dev@lists.linuxppc.org, debian-powerpc@lists.debian.org
Subject: Re: Pismo status
Date: Wed, 17 May 2000 14:08:36 +0200 [thread overview]
Message-ID: <20000517140836.A12638@lambda.u-strasbg.fr> (raw)
In-Reply-To: <Pine.LNX.4.10.10005171253140.16549-100000@opal.biophys.uni-duesseldorf.de>; from schmitz@opal.biophys.uni-duesseldorf.de on Wed, May 17, 2000 at 12:54:22PM +0200
On Wed, May 17, 2000 at 12:54:22PM +0200, Michael Schmitz wrote:
> > Tim Wojtulewicz wrote:
> > > No it's definitely supposed to have a fan. It comes on in MacOS.
> > > The problem is that the PMU is not fully supported yet, so it doesn't
> > > understand that the processor is too hot. I'm trying to find
> > ^^^^^^^^^^^^^^^^^^^^
> > Does this mean that I can damage the machine if I just run a high-load
> > program?!?
>
> I strongly doubt that. The PMU should handle this autonomously, regardless
> of Linux support for the PMU.
Also, i think the ppc cpu will halt itself when becoming too hot, and not let
itself burn. At elast it was so since the earlier 680x0 cpus.
Friendly,
Sven LUTHER
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2000-05-17 12:08 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-05-16 7:23 Pismo status Chris Leishman
2000-05-16 8:46 ` Michel Dänzer
2000-05-16 14:15 ` Sven LUTHER
2000-05-16 14:13 ` Chris Leishman
2000-05-16 19:51 ` Tim Wojtulewicz
2000-05-17 9:03 ` Albrecht Dre_
2000-05-17 10:54 ` Michael Schmitz
2000-05-17 12:08 ` Sven LUTHER [this message]
2000-05-18 5:15 ` Timothy A. Seufert
2000-05-18 9:13 ` Sergio Brandano
2000-05-18 14:35 ` Sven LUTHER
2000-05-18 15:33 ` Sergio Brandano
2000-05-18 14:47 ` Sven LUTHER
2000-05-18 15:49 ` Sergio Brandano
[not found] ` <20000519094029.A16145@lambda.u-strasbg.fr>
2000-05-19 12:30 ` Sergio Brandano
2000-05-19 19:42 ` Worth
2000-05-20 9:51 ` Sergio Brandano
2000-05-20 11:53 ` Michel Dänzer
2000-05-21 5:52 ` David A. Gatwood
2000-05-22 13:32 ` Sven LUTHER
2000-05-22 14:44 ` Sergio Brandano
2000-05-22 13:54 ` Sven LUTHER
2000-05-22 15:01 ` Sergio Brandano
2000-05-22 14:13 ` Sven LUTHER
2000-05-22 15:16 ` Sergio Brandano
2000-05-22 14:33 ` Sven LUTHER
2000-05-22 15:41 ` Michael Schmitz
2000-05-22 15:48 ` Michel Dänzer
2000-05-22 16:46 ` Sergio Brandano
2000-05-22 17:08 ` Michael Schmitz
2000-05-23 17:48 ` Debian pmud package available Michael Schmitz
2000-05-23 18:59 ` Sergio Brandano
2000-05-23 18:09 ` Michael Schmitz
2000-05-24 7:11 ` Stephan Leemburg
2000-05-24 7:31 ` PMUD vs APM Joseph Garcia
2000-05-24 11:00 ` Sergio Brandano
2000-05-24 10:13 ` Joseph Garcia
2000-05-24 11:04 ` Steven Hanley
2000-05-24 9:18 ` Debian pmud package available Michael Schmitz
2000-05-24 20:23 ` Michael Schmitz
2000-05-25 12:04 ` Michel Dänzer
2000-05-25 20:25 ` Michael Schmitz
2000-05-26 7:58 ` Francois Felix Ingrand
2000-05-26 9:25 ` Michael Schmitz
2000-05-28 1:58 ` Robert Thompson
2000-05-28 12:03 ` Michael Schmitz
2000-05-28 14:35 ` Michel Dänzer
2000-05-28 14:42 ` Michael Schmitz
2000-05-30 6:55 ` Daniel Jacobowitz
2000-05-30 8:57 ` Benjamin Herrenschmidt
2000-05-30 20:11 ` Daniel Jacobowitz
2000-05-31 13:20 ` Francois Felix Ingrand
2000-05-31 19:01 ` Michael Schmitz
2000-06-01 7:45 ` Francois Felix Ingrand
2000-06-01 8:53 ` Michel Dänzer
2000-06-06 18:44 ` Michael Schmitz
2000-06-06 19:12 ` Joseph Garcia
2000-06-06 19:42 ` Michel Dänzer
2000-06-06 20:00 ` Pismo battery support (was 'Re: Debian pmud package available') Joseph Garcia
2000-06-06 20:13 ` Michel Dänzer
2000-06-07 7:08 ` Stephan Leemburg
2000-06-07 7:55 ` Benjamin Herrenschmidt
2000-06-06 20:09 ` Debian pmud package available Michel Dänzer
2000-06-07 13:50 ` Francois Felix Ingrand
2000-05-24 0:31 ` Wilhelm Fitzpatrick
2000-05-24 7:30 ` Stephan Leemburg
2000-05-21 21:01 ` Pismo status Timothy A. Seufert
2000-05-21 21:28 ` Rawhide SRPMS ian reinhart geiser
2000-05-22 5:17 ` Pismo status Ethan Benson
2000-05-22 8:58 ` Timothy A. Seufert
2000-05-22 21:34 ` David A. Gatwood
2000-05-20 16:23 ` Sven LUTHER
2000-05-21 6:10 ` David A. Gatwood
2000-05-18 20:06 ` Worth
2000-05-18 14:33 ` Sven LUTHER
2000-05-19 5:40 ` Timothy A. Seufert
2000-05-18 14:48 ` Tim Wojtulewicz
2000-05-19 5:53 ` Timothy A. Seufert
2000-05-17 15:04 ` Tim Wojtulewicz
2000-05-17 16:15 ` Sergio Brandano
2000-05-17 17:36 ` Worth
-- strict thread matches above, loose matches on Subject: below --
2000-05-21 10:12 Claudio Nieder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20000517140836.A12638@lambda.u-strasbg.fr \
--to=luther@debian.org \
--cc=Tim.Wojtulewicz@nau.edu \
--cc=ad@mpifr-bonn.mpg.de \
--cc=debian-powerpc@lists.debian.org \
--cc=linuxppc-dev@lists.linuxppc.org \
--cc=luther@dpt-info.u-strasbg.fr \
--cc=schmitz@opal.biophys.uni-duesseldorf.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).