From: Josh Huber <huberj@wpi.edu>
To: Linux/PowerPC Devel List <linuxppc-dev@lists.linuxppc.org>
Subject: Lite-On ethernet controller
Date: Wed, 31 May 2000 09:02:15 -0400 [thread overview]
Message-ID: <20000531090215.A652@mclinux.com> (raw)
I have what appears to be a Lite-On ethernet controller, which is supported
by the tulip driver. What it really is, is a Asante FriendlyNET card. I had
heard that the card works in 2.2.14+, but I'm having trouble getting it to
work in later kernels (devel).
Because of the network driver interface change, I can't try out the newest
tulip driver in 2.4pre. Does anyone know of forward-ported tulip drivers?
The particular error I'm seeing only happens with moderate load -- pings and
other light traffic work 100%.
Error information:
NETDEV WATCHDOG: eth1: transmit timed out
Transmit timed out, status e4660000, CSR12 000050ca, resetting...
Device information:
tulip driver output:
eth1: Lite-On PNIC-II rev 37 at 0x1c00, 00:00:94:C5:EF:FF, IRQ 30.
lspci -vv output attached because it's too wide.
Any ideas?
Josh
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next reply other threads:[~2000-05-31 13:02 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-05-31 13:02 Josh Huber [this message]
2000-05-31 13:32 ` Lite-On ethernet controller Jeff Garzik
2000-05-31 13:45 ` Josh Huber
2000-05-31 18:40 ` Michel Lanners
2000-06-01 12:53 ` Josh Huber
2000-06-01 19:54 ` Geert Uytterhoeven
2000-05-31 20:10 ` Geert Uytterhoeven
2000-05-31 20:32 ` Josh Huber
2000-05-31 20:45 ` Jeff Garzik
2000-05-31 18:33 ` Michel Lanners
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20000531090215.A652@mclinux.com \
--to=huberj@wpi.edu \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).