From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <200005312131.XAA21692@denx.local.net> To: "'Linux PPC'" Subject: Re: EST SBC8260 & abatron From: Wolfgang Denk Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Wed, 31 May 2000 16:25:43 EDT." <7283DE19D141D111AD0E00A0C95B195502581D61@mail2.aiinet.com> Date: Wed, 31 May 2000 23:31:27 +0200 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: In message <7283DE19D141D111AD0E00A0C95B195502581D61@mail2.aiinet.com> you wrote: > > I'm having trouble accessing the upper 8MB of the 16MB SDRAM SIMM on this > board. > I'm wondering if I don't have something configured wrong in my BDI2000 > config file. Although I don't have a 8260 here to test, you could send me your BDI2000 config file. BTW - which firmware version are you running? Abatron implemented some Linux-friendly extensions lately... > Would anyone care to send me one they're using that works? Is a MPC8xx file of any uise to you? > Also, we're trying to load the linux kernel into this system. > How are the folks out there doing that? Via ftp? Via a bootloader on the > 2MB FLASH > chip on the board tied to /CS0? What exactly? Well, why don't you use your BDI2000 to load the image, or to load it and burn it to FLASH? You already have a BDI, so use it... Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de The Gates in my computer are AND, OR and NOT; they are not Bill. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/