From: bob@kunk.jriver.com
To: linuxppc-dev@lists.linuxppc.org
Subject: Frustration with MACE...
Date: Sat, 3 Jun 2000 23:04:07 -0500 (CDT) [thread overview]
Message-ID: <20000604040407.10637.qmail@kunk.jriver.com> (raw)
I've spent several hours tonite trying to get the MACE driver to behave
properly on a 7200/90 with the 2.2.15pre20 kernel.
The internal ethernet is connected via the 10BT port. It works sometimes for
a while and then just stops working. I have tried it through a switch and
with a cisco 675.
I looked over the plscc configs, noticed the little force AAUI config.
Tried different plscc combos, tried different phycc (PHY) combos, it's
still flakey! I've tried it on 3 7200's. It works pretty well on only one.
If the machine is in MacOS I can pump megabytes through the Mesh without
trouble.
If I use a PCI ethernet card, it works perfectly. I'm running out of ideas
(and if don't get this working, I'll be out of PCI slots).
When it doesn't work, I don't even get errors in netstat -in.
Any IDEAS????
Bob
--
Robert E. Brose II N0QBJ
http://www.jriver.com/~bob/
bob@kunk.jriver.com
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
reply other threads:[~2000-06-04 4:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20000604040407.10637.qmail@kunk.jriver.com \
--to=bob@kunk.jriver.com \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).