From mboxrd@z Thu Jan 1 00:00:00 1970 From: bob@kunk.jriver.com Message-ID: <20000604040407.10637.qmail@kunk.jriver.com> Subject: Frustration with MACE... To: linuxppc-dev@lists.linuxppc.org Date: Sat, 3 Jun 2000 23:04:07 -0500 (CDT) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: I've spent several hours tonite trying to get the MACE driver to behave properly on a 7200/90 with the 2.2.15pre20 kernel. The internal ethernet is connected via the 10BT port. It works sometimes for a while and then just stops working. I have tried it through a switch and with a cisco 675. I looked over the plscc configs, noticed the little force AAUI config. Tried different plscc combos, tried different phycc (PHY) combos, it's still flakey! I've tried it on 3 7200's. It works pretty well on only one. If the machine is in MacOS I can pump megabytes through the Mesh without trouble. If I use a PCI ethernet card, it works perfectly. I'm running out of ideas (and if don't get this working, I'll be out of PCI slots). When it doesn't work, I don't even get errors in netstat -in. Any IDEAS???? Bob -- Robert E. Brose II N0QBJ http://www.jriver.com/~bob/ bob@kunk.jriver.com ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/