From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benjamin Herrenschmidt To: Dan Malek , Subject: Re: Serial Date: Fri, 16 Jun 2000 21:31:13 +0200 Message-Id: <20000616193113.4004@mailhost.mipsys.com> In-Reply-To: <394A5253.658D6BEF@embeddededge.com> References: <394A5253.658D6BEF@embeddededge.com> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: On Fri, Jun 16, 2000, Dan Malek wrote: >> Does the "stealth" serial port for blue-G3 work with Linux ? > >I use them in my old iMac, new iMac (rev. D), iMac DV, and in my G4 >server. If the blue-G3 uses the same kind of modem as any of these, >and if the Stealth folks claim it will work in the G3, I would suspect >it works fine. There is a challenge with the iMac DV, because they >don't make a card specifically for that machine. I used a G4 version, >removed the header pins and soldered the cable directly to the board. >Tight fit, but it works. I confirm, it works on the B&W G3, it's plugged on the good old SCCs of the mac-io "coffee-machine" Ben. ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/