* About redwood
@ 2000-06-22 1:07 Wentao Xu
0 siblings, 0 replies; only message in thread
From: Wentao Xu @ 2000-06-22 1:07 UTC (permalink / raw)
To: benb; +Cc: linuxppc-embedded
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 981 bytes --]
Ben,
It is great to get your msg. Yes, my board is
redwood3.
It has these components:
Philips IC (Smartcard) Card Interfaces (TDA8002 and
TDA8004)
Crystal Semiconductor Multi Standard Infrared
Transceiver (CS8130)
4M x 16 DRAM Chips (2 components are used for 32 bit
mode, 1 for 16 bit mode)
SDRAM Memory Chips (4M x 16, 2 chips)
2 AMD Am29F800B 1MB Flash ROMs for a total of 2 MB
(socket for 1 Flash in 16 bit
mode)
National Ethernet Controller (DP83902AV)
Programmable Logic
Xilinx FPGA (XC5210 and XC3142)
PLD (XC9536) - controls IDE and Ethernet interfaces
Xicor 2KB I2C EEPROM (X24165S)
27 MHz VCXO
IBM31T1100A IR transceiver
Siemens SFH 506-38: IR receiver/38 KHz demodulator
MAXIM MAX562: Serial RS-232 level conversion for
16550 UART2
Rockwell 2400 baud socket modem SF224ATF
ATMEL AT45D021 2MB Serial FLASH
I am looking forward to your further help.
Wentao
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-06-22 1:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-06-22 1:07 About redwood Wentao Xu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).