Re: omitted kernel sections

[Wolfgang Denk <wd@denx.de>]

In message <NEBBKFENMLEDKDHMEHPJKEMECAAA.kskim@neowave.co.kr> Kwansuk
Kim wrote:
>
> when I was following the procedure : initialize console on SMC2, memory allocation for kernel and ramdisk...
> there was a problem. The compressed kernel image wasn't loaded. So the procedure stopped on gunzip process.

Which version of Linux are you using?

> I use AMC BDM port, and I speculate the messages.
>
> It's the message when kernel is loaded.
>
> ---------------------------------------
> > LOAD 'c:\860source\zvmlinux.initrd'
>   Warning: symbols deleted - check use in macros etc.
>  Loading section '.text' located at 0x00400000..0x004046E4
>  Loading section '.rodata' located at 0x004046F0..0x00404B90
>  Loading section '.data' located at 0x00405000..0x0040530C
>  Loading section '.bss' located at 0x00406000..0x0040B1F0
>   Warning:
>   'main' function not found in file: c:\860source\zvmlinux.initrd
>   Note: in startup routine. Enter STEP to go to High-level module.

It seems your debugger loads only the boot loader code,  but  neither
the kernel nor the initrd.

> This is the section map through the command 'objdump -h zvmlinux.initrd'
>
> --------------------
> zvmlinux.initrd:     file format elf32-big
>
> Sections:
> Idx Name          Size      VMA       LMA       File off  Algn
>   0 .text         000046e4  00400000  00400000  00010000  2**2
>                   CONTENTS, ALLOC, LOAD, READONLY, CODE
>   1 .rodata       000004a0  004046f0  004046f0  000146f0  2**4
>                   CONTENTS, ALLOC, LOAD, READONLY, DATA
>   2 .data         0000030c  00405000  00405000  00015000  2**2
>                   CONTENTS, ALLOC, LOAD, DATA
>   3 .bss          000051f0  00406000  00406000  00016000  2**2
>                   ALLOC
>   4 .image        00064605  00000000  00000000  00016000  2**0
>                   CONTENTS, READONLY
>   5 .initrd       00201d19  00000000  00000000  0007a605  2**0
>                   CONTENTS, READONLY
>
> Why weren't .image, .initrd section loaded? Because they aren't elf format file?

Most probably because your debugger loads  only  such  sections  that
have the "LOAD" flag set.

> What can I do? I haven't any idea.

There are several solutions; for instance, use objcopy to set the
"LOAD" flag on the '.image' and '.initrd' sections, too.

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
If programming was easy, they wouldn't need something as  complicated
as a human being to do it, now would they?
                       - L. Wall & R. L. Schwartz, _Programming Perl_

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/