From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <200008020026.BAA22003@hyperion.valhalla.net> Date: Wed, 02 Aug 2000 01:25:51 +0100 Subject: Re: LinuxPPC X Server From: "Iain Sandoe" To: Michael Schmitz , Josh Huber CC: linuxppc-dev@lists.linuxppc.org Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: >> > However, 300M G3, UW SCSI + 256 Mb RAM ==> 6.5-ish Hours (*all* day was only >> > a slight exaggeration :-). >> > >> > (OK, so I did a kernel build as well [30 mins] and had a screen saver >> > running - but... ) >> >> I'm guessing that your screen saver might have been using a bit much >> CPU. I built XF4 on my powerbook wallstreet 233 in a little under 2 >> hours, with no configuration file changes. (except for ProjectRoot). > > Similar here on a Lombard 400 MHz - 1.5 hours, with ProjectRoot on a NFS > mount. Only 64 MB RAM, only config file change was not to build fonts. > > The screen saver must have been running at over 60% CPU :-) Which is rather worrying (seti screensaver runs very nice-d) and I wasn't using the graphics output... Ho Hum... :-) Hey, I'll try it again (with the correct config.) sometime soon... Iain. ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/