From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <20000921180657.A25427@lx.c-side.com> Date: Thu, 21 Sep 2000 18:06:57 -0700 From: Neil Russell To: Jerry Van Baren , linuxppc-embedded@lists.linuxppc.org Cc: systemboot@linux01.hasler.ascom.ch Subject: Re: Limon & PowerQUICC II References: <0G1800HE5TPGL0@pmdf-it.hasler.ascom.ch> <4.3.2.20000921142722.00b8b720@falcon.si.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <4.3.2.20000921142722.00b8b720@falcon.si.com>; from Jerry Van Baren on Thu, Sep 21, 2000 at 03:05:00PM -0400 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Thu, Sep 21, 2000 at 03:05:00PM -0400, Jerry Van Baren wrote: > >4. I have set IMMR to 0xF000000. Is that correct for limon? > > The reset config word is what sets the IMMR. It has to agree with the > limon's notion of where the IMMR is. Beyond that, it is your > choice. The EST default value is 0x0F000000 which is unfortunately > different from the linux convention. Actually, limon will read the reset configuration word to find what the IMMR should be, then changes it to 0xf0000000. If you flash limon and have the reset conf word right, all will be well. If you download limon using the vxWorks loader, then the reset conf word needs to set IMMR to 0x0f000000, so the vxWorks loader and limon can agree. Neil. -- Neil Russell ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/