From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 26 Oct 2000 10:23:58 -0400 From: Josh Huber To: Linux/PowerPC Devel List Subject: Re: lombard ethernet Message-ID: <20001026102358.B12571@missioncriticallinux.com> References: <20001026095459.A12571@missioncriticallinux.com> <20001026071006.C4741@opus.davidb.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="ADZbWkCsHQ7r3kzd" In-Reply-To: <20001026071006.C4741@opus.davidb.org>; from linux-kernel@davidb.org on Thu, Oct 26, 2000 at 07:10:06AM -0700 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: --ADZbWkCsHQ7r3kzd Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Thu, Oct 26, 2000 at 07:10:06AM -0700, David Brown wrote: > I began experiencing the same problem on my Lombard as soon as I switched > to a 100Base-T hub. It expecially seems to happen when I transfer a lot = of > data. I'm using a fixed IP address, so it doesn't seem to be related to > anything like that. I think the driver itself stops either sending or > receiving packets. Hmm, that's interesting. I hadn't thought about that. At home I have a 10b-t network and things work fine there. At work, I'm hooked up to a 100 b-t switch on my desk, and this is where things die. Maybe as a test I could force the bmac driver to use 10bt? ttyl, --=20 Josh Huber | huber@nightshade.org | 1024D/6B21489A 61F0 6138 BE7B FEBF A223 E9D1 BFE1 2065 6B21 489A --ADZbWkCsHQ7r3kzd Content-Type: application/pgp-signature Content-Disposition: inline --ADZbWkCsHQ7r3kzd-- ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/