From: Simon Piette <spiette@generation.net>
To: linuxppc-dev@lists.linuxppc.org
Subject: Re: whacked out 2.2.18pre17?
Date: Sat, 4 Nov 2000 07:35:40 -0500 [thread overview]
Message-ID: <20001104073540.A23753@xim.dyndns.org> (raw)
In-Reply-To: <v04003a01b629191ff4ae@[24.70.162.12]>; from nicoya@apia.dhs.org on Fri, Nov 03, 2000 at 08:01:55PM -0600
Hi,
* Tony Mantler (nicoya@apia.dhs.org) [001103 21:14]:
>
> At 7:15 PM -0600 11/3/2000, Stefan Jeglinski wrote:
> [...]
> >Well, this is unlike most users of Twin Turbo cards, if the past list
> >traffic is any measure. Interestingly, I have seen comments before
> >that the issue is not the imsttfb driver, but X itself. This would
> >not be inconsistent with your setup, given the debian X. I would love
> >to get the twin turbo working, I have been waiting for X4 to get far
> >enough along, but it appears to still be lacking in even
> >straightforward atyfb support (debugged that is), as per the last I
> >read. Older ATI Rage Pro card(s) are what else I have, but it won't
> >do me any good to get one card working if another that I have breaks.
>
> >From a kterm 5 seconds ago:
>
> merida:~# cat /proc/fb
> 0 IMS TT (IBM)
> merida:~# uname -a
> Linux merida 2.2.17 #8 SMP Sun Oct 29 10:17:32 CST 2000 ppc unknown
> merida:~# dpkg -l xserver-fbdev
> [...]
> ii xserver-fbdev 3.3.6-11 X server for framebuffer-based graphics driv
> merida:~# fbset -x
>
> Mode "1280x1024"
> # D: 135.007 MHz, H: 102.278 kHz, v: 96.126 Hz
> DotClock 135.008
> HTimings 1280 1296 1304 1320
> VTimings 1024 1040 1048 1064
> Flags "+HSync" "+VSync"
> EndMode
>
>
> Of course, the actual dotclock is really only 105.336 MHz (1280x1024x75Hz),
> but the modeline works. 1280x1024x96Hz would be nice, mind you, but I don't
> quite think my monitor could take it. ;)
>
Could you elaborate on that? I have an IMSTT 128 (2Mb VRAM) and I'm
unable to accelerated video on a plain pmac kernel. I am currently stuck
at kernel 2.2.12 because this is the only kernel that will accept a
patch from Ryen Nielsen (http://krazynet.com/~ran/linux/imsttfb.c).
The last pmac I tried is 2.2.16
Here's some info about my system:
$ uname -a
Linux xim.dyndns.org 2.2.12-9a #2 Thu Jul 20 01:34:31 EDT 2000 ppc
unknown
$ cat /proc/cmdline
root=/dev/sdb6 video=imsttfb:vmode:17,cmode:16 idebus=66 hda=noautotune
$ lspci -vv
[snip]
00:0e.0 Display controller: Integrated Micro Solutions Inc. IMS9129 (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 8 min, 8 max, 32 set
Interrupt: pin A routed to IRQ 24
Region 0: Memory at 82000000
(32-bit, prefetchable)
[snip]
Simon Piette
--
PGP key ID: 1024D/99290743 Simon Piette <spiette@generation.net>
PGP Key fingerprint: 9AF9 33F9 A900 E153 9DF3 0625 8928 CB52 9929 0743
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2000-11-04 12:35 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-11-03 5:53 whacked out 2.2.18pre17? Stefan Jeglinski
2000-11-03 15:56 ` Benjamin Herrenschmidt
2000-11-04 6:03 ` Stefan Jeglinski
2000-11-04 12:47 ` Benjamin Herrenschmidt
2000-11-04 15:55 ` Stefan Jeglinski
2000-11-05 9:36 ` Michel Lanners
2000-11-05 22:59 ` Stefan Jeglinski
2000-11-06 7:12 ` Michel Lanners
2000-11-18 3:12 ` whacked out 2.2.18pre21? Stefan Jeglinski
2000-11-18 20:03 ` Stefan Jeglinski
2000-11-18 20:09 ` aic7xxx panic in 2.2.18pre21 Hollis R Blanchard
2000-11-18 21:33 ` Stefan Jeglinski
2000-11-10 6:58 ` whacked out 2.2.18pre17? [partly solved] Stefan Jeglinski
2000-11-03 23:52 ` whacked out 2.2.18pre17? Tony Mantler
2000-11-04 1:15 ` Stefan Jeglinski
2000-11-04 2:01 ` Tony Mantler
2000-11-04 12:35 ` Simon Piette [this message]
2000-11-04 15:32 ` Tony Mantler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20001104073540.A23753@xim.dyndns.org \
--to=spiette@generation.net \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).