From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Sat, 11 Nov 2000 19:08:41 +1100 From: Steven Hanley To: Linux PPC Dev Subject: success sort of with 2.2.10 Message-ID: <20001111190841.A8799@wibble.net> Reply-To: Steven Hanley Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: All well 2.2.10 will get past the blank screen on my 7220, 2.2.18pre18 and 2.2.17 (came with debian) both dont. Now it has frozen booting the kernel at the line after detecting hdc the output looks like hda: QUANTUM FIREBALL ST2100A, ATA DISK drive hdc: MATSHITA CR-585, ATAP CDROM drive ide0 at 0x01020000-0x1020007,0x1020160 on irq 13 is that the right output? on my x86 it says ide0 0x1f0-0x1f7,0x3f6 on irq 14 the addresses are very different, however this could just be because the ppc uses a very different address space model or some such. I just compiled the 2.2.10 kernel I am using and I left out pci ide support, but it has the built in powermac ide support still selected, so this could be the problem. It has been a long time since I had 2.2.10 on this powermac last so I dont have my old .configs around anymore. Anyway once I have found a way to make the thing get past this point in the kernel booting, I will have to start going through the kernels from 2.2.10 up and see which do and dont work. Now for that I need some way to get the different revisions. Are there any places other than bitkeeper that will let me do this? like a cvs tree? Paulus' rsync I dont think will let me get anything but the latest version that he has up there. Also should I maybe try out 2.2.4someversion ? See You Steve -- sjh@wibble.net http://wibble.net/~sjh/ Look Up In The Sky Is it a bird? No Is it a plane? No Is it a small blue banana? YES ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/