From mboxrd@z Thu Jan 1 00:00:00 1970 From: bgat@open-widgets.com Date: Wed, 6 Dec 2000 20:37:38 -0600 To: Dan Malek Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: MBX860 serial on J19? Message-ID: <20001206203738.B9460@sr1.open-widgets.com> References: <20001205163100.A7845@sr1.open-widgets.com> <3A2EBFBF.9628F0CC@mvista.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="LpQ9ahxlCli8rRTG" In-Reply-To: <3A2EBFBF.9628F0CC@mvista.com>; from dan@mvista.com on Wed, Dec 06, 2000 at 05:37:51PM -0500 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: --LpQ9ahxlCli8rRTG Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Dan: > > I have a stock Motorola MBX860 board, and I'm trying to use the serial > > ports connected to the Utility #2 connector, J19. These ports are > > connected to the SMSC 37c672. > >=20 > > In short, nothing is working. >=20 > That's because there isn't any software for them. I figured that. I looked at a lot of code before posting my question, I was hoping that I was just missing something or that the MBX860 looked more like a PC than I thought it did. Not having schematics is a real problem here. Incidentally, I'm not all that happy with the MBX anyway. Just add this to the list... Thanks for the help. b.g. --=20 Bill Gatliff bgat@open-widgets.com --LpQ9ahxlCli8rRTG Content-Type: application/pgp-signature Content-Disposition: inline --LpQ9ahxlCli8rRTG-- ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/