From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Tue, 9 Jan 2001 20:48:01 -0700 From: Tom Rini To: Dan Malek Cc: Brian Ford , linuxppc-embedded@lists.linuxppc.org Subject: Re: menuconfig for PPC860T Message-ID: <20010109204801.A28095@opus.bloom.county> References: <3A5B5604.36EF3E2E@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <3A5B5604.36EF3E2E@mvista.com>; from dan@mvista.com on Tue, Jan 09, 2001 at 01:18:44PM -0500 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: On Tue, Jan 09, 2001 at 01:18:44PM -0500, Dan Malek wrote: > Brian Ford wrote: > > > For about the last week, make xconfig has stopped working for the > > EST8260 board in the 2.5 bk tree. It dies with: > > > > make[1]: Entering directory `/home/ford/linux/src/linuxppc_2_5/scripts' > > cat header.tk >> ./kconfig.tk > > ./tkparse < ../arch/ppc/config.in >> kconfig.tk > > statement not in menu > > make[1]: *** [kconfig.tk] Error 1 > > Aside from this, I don't think anything but the manual 'make config' has > ever worked for the 8260. The problem is I set two processor type > configuration variables, CONFIG_6xx and CONFIG_8260. Most of the > scripts try to be "smart" and only allow one to be set. I know > 'make menuconfig' doesn't work properly, I suspect 'make xconfig' > does the same (unless Tom has fixed this recently :-). I actually fixed menuconfig recently, in the 2_5 bk tree. I'll try xconfig tomorrow and attempt to fix it. -- Tom Rini (TR1265) http://gate.crashing.org/~trini/ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/