From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 15 Jan 2001 08:15:17 +0000 Subject: bk 2.4.1pre2 Lombard PCI allocation fails. From: "Iain Sandoe" To: linuxppc-dev@lists.linuxppc.org Mime-version: 1.0 Content-type: text/plain; charset="utf-8" Message-Id: <20010115081732.43695DB9FD@atlas.valhalla.net> Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi, as the title says... The machine boots and (seems) OK. FWIW: I boot this machine with BootX [1.2.2] (and always have, without problem, until this time). relevant DMESG below. ciao, Iain. ======== Linux version 2.4.1-pre2 (iain-s@athena) (gcc version 2.95.2 19991024 (release/franzo)) #1 Mon Jan 15 05:27:33 GMT 2001 Registered 1 feature controller(s) PMU driver initialized for 1999 PowerBook G3 Found Grackle (MPC106) PCI host bridge at 0x80000000. Firmware bus number: 0->0 [...] POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Fixup mem res, dev: 0.e, res_start: 80882000->80882000 Fixup mem res, dev: 0.10, res_start: 80800000->80800000 Fixup mem res, dev: 0.11, res_start: 81000000->81000000 Fixup mem res, dev: 0.11, res_start: 81fff000->81fff000 Fixup mem res, dev: 0.13, res_start: 80880000->80880000 PCI: Resource 80882000-80882fff (f=200, d=0, p=0) PCI: Resource 00000c00-00000cff (f=101, d=0, p=0) PCI: Resource 80800000-8087ffff (f=200, d=0, p=0) PCI: Resource 81000000-81ffffff (f=200, d=0, p=0) PCI: Resource 81fff000-81ffffff (f=200, d=0, p=0) PCI: Cannot allocate resource region 2 of device 00:11.0 PCI: Resource 80880000-80880fff (f=200, d=0, p=0) PCI: Resource 00000c00-00000cff (f=101, d=1, p=1) PCI: Cannot allocate resource region 1 of device 00:11.0 got res[10000000:10000fff] for resource 2 of ATI Technologies Inc 3D Rage LT Pro Registered "pmu" backlight controller, level: 1/15 ====== ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/